24 Tool Maintenance jobs in Kuwait

**TITLE: MAINTENANCE TECHNICIAN**

**REPORTS TO: MAINTENANCE SUPERVISOR**

**Primary Purpose**:
The maintenance technician is responsible for a wide variety of maintenance activities, preventive maintenance routines, and problem resolution. Responsibilities include but are not limited to maintaining property appearance, electrical, plumbing, heating, air conditioning, and power systems, installing equipment and appliances, sound system setups, apartment setups, general painting of the facility.

**Responsibilities**:

- Maintaining property appearance, equipment, and systems including but not limited to air conditions, electrical, and plumbing at the direction of the Director of Operations.
- Perform troubleshooting, diagnostics, and general repair to various facility systems.
- Repair and maintain malfunctioning lighting systems.
- Inspect facilities and equipment regularly for problematic or unsafe conditions.
- Carry out routine daily, weekly, monthly general maintenance checks on air conditioner units, plumbing systems, equipment, electrical appliances, electrical, etc. installed in the premises and do the needful accordingly ensuring safe working practices are maintained.
- Install equipment and appliances as required.
- Set up sound systems and projectors for presentations or special events.
- Set up and check sound systems for KG, Elementary, and MS/HS assemblies and gymnasiums.
- Provide full technical/maintenance support to Events Manager, Principals, IT dept. during annual/other events.
- Prepare and submit to the operations director, an annual maintenance schedule for servicing of all split A/c units and package units and service as scheduled.
- Supervise/coordinate with A/C maintenance contractor for major breakdowns and preventive maintenance.
- Coordinating/ supervising pest control around the campus.
- Coordinating/ supervising landscape company and to take care of the irrigation system.
- Updating the maintenance binder.
- Preparing the summer to-do list.
- Supervise/coordinate with the lift maintenance company for monthly maintenance and major breakdowns.
- Check water temperature and quality of swimming pool as well as supervise/coordinate with the swimming pool company during routine cleaning and maintenance.
- Diagnose and troubleshoot problems with plumbing systems including making new pipelines.
- Trace electrical faults and troubleshoot accordingly.
- Check network viewer to ensure security cameras and lights are in working condition and maintain as required.
- Adjust time for the bell system within the network.
- Check on the telephone exchange system and ensure all extensions and ministry lines are in working order.
- Inspect drinking water vending machines and inform water suppliers accordingly.
- Check and ensure all three phases are available at the MEW input power supply lines.
- Handle repair works on classroom and office furniture as required.
- Set up viewing galleries.
- Carry out minor carpentry and other related jobs as required.
- Handle purchases of spares from the local market, required for regular maintenance/breakdowns.
- Prepare a weekly checklist and daily reports to be submitted to the Admin Manager/Operations Director.

**Qualifications**:

- Must be experienced and knowledgeable with A/C and its issues
- Must have ITI certificate
- Diploma in Electrical Engineering
- Firefighting and other relevant skills for apartment/building maintenance
- Must be fluent in English
- Excellent verbal and written communication skills.
- Proficient in Microsoft Office Suite or related software

**About American Baccalaureate School**:
ABS is a private, non-profit school offering an American-based curriculum including a wide variety of advanced courses, and a college preparatory program, guiding students to become independent, intellectual global citizens. It is our goal to develop responsible and accountable young adults who are prepared for the challenges of international universities. The American Baccalaureate School opened its doors in September 2006 to 550 students. We now have over 1,300 students enrolled from pre-Kindergarten through 12th grade.

Maintenance Technician - Cementing

Location: Kuwait

Job Description / Responsibilities:

1. Troubleshoot problems on Tractors.
2. Troubleshoot & Overhaul all Diesel Engines.
3. Troubleshoot & Overhaul Gear Box / Transmissions on Tractors.
4. Troubleshoot & Overhaul High Pressure Reciprocating Pumps – (Power End).
5. Troubleshoot & Overhaul complete Centrifugal Pumps.
6. Troubleshoot & Overhaul Pneumatic Systems provided on Units.
7. Troubleshoot & Overhaul Hydraulic System provided on Units.
8. Troubleshoot & Repair Instruments and Instrument Systems provided on all Units.
9. Ability to carry out Fabrications & Welding.
10. Ability to carry out Welding to a certified quality.
11. Be available on Short Notice to visit the job sites or on the highway for equipment breakdown.
12. Must be able to perform troubleshooting and overhauling on Non Standard Equipment like different types of engines, transmission, different makes of tractor heads, etc. or where there is No Part Book Manuals available for the equipment.
13. Ability to identify and stock right spares inventory while going through parts manual.

Education / Qualifications:

Preference will be given to candidates having High School or Technical Trade Certificate or Diploma.

6 - 8 years relevant experience in an oil field company.

Must have Kuwait Light / Heavy Duty Driving License.

Interested candidates please upload a copy of your CV.

#J-18808-Ljbffr

Technician

Job Id :100170721

×

Please enter details to report job

Name*

Email*

Reason to report

Description

Location: Kuwait

WhatsApp CV to: +965 66474334

Must Have a Valid Driver’s License

We are looking for a General Maintenance Technician (All-Rounder) to join our restaurant group in Kuwait.

️ Job Includes

AC, refrigerator, and freezer repairs

Kitchen equipment maintenance (fryers, ovens, grills)

Plumbing – leaks, drainage, water line fixing

Basic electrical – lights, switches, wiring

Painting, tiling, wall patching

Emergency response – breakdowns, power or water issues

️ Ideal Candidate

• Experience in restaurants, hotels, or commercial kitchens
• Knows how to work independently
• Honest, responsible, and ready to respond quickly
• Basic English is okay
  
  

Basic Details

Location : Salmiya , Kuwait

Qualification

Posted : Today

Job Type : Full-Time

Company : Kuwait Jobs

Contact Info

Mobile : +965 66474334

Alternate Mobile : Not-Mentioned

Email : Not-Mentioned #J-18808-Ljbffr

Technician

Job Id :100170721

×

Please enter details to report job

Name*

Email*

Reason to report

Description

Location: Kuwait

WhatsApp CV to: +965 66474334

Must Have a Valid Driver’s License

We are looking for a General Maintenance Technician (All-Rounder) to join our restaurant group in Kuwait.

️ Job Includes

AC, refrigerator, and freezer repairs

Kitchen equipment maintenance (fryers, ovens, grills)

Plumbing – leaks, drainage, water line fixing

Basic electrical – lights, switches, wiring

Painting, tiling, wall patching

Emergency response – breakdowns, power or water issues

️ Ideal Candidate

Experience in restaurants, hotels, or commercial kitchens Knows how to work independently Honest, responsible, and ready to respond quickly Basic English is okay

Basic Details

Location :

Salmiya , Kuwait

Qualification

Posted :

Today

Job Type :

Full-Time

Company :

Kuwait Jobs

Contact Info

Mobile :

+965 66474334

Alternate Mobile :

Not-Mentioned

Email :

Not-Mentioned #J-18808-Ljbffr

Maintenance Technician - Cementing Location:

Kuwait Job Description / Responsibilities: Troubleshoot problems on Tractors. Troubleshoot & Overhaul all Diesel Engines. Troubleshoot & Overhaul Gear Box / Transmissions on Tractors. Troubleshoot & Overhaul High Pressure Reciprocating Pumps – (Power End). Troubleshoot & Overhaul complete Centrifugal Pumps. Troubleshoot & Overhaul Pneumatic Systems provided on Units. Troubleshoot & Overhaul Hydraulic System provided on Units. Troubleshoot & Repair Instruments and Instrument Systems provided on all Units. Ability to carry out Fabrications & Welding. Ability to carry out Welding to a certified quality. Be available on Short Notice to visit the job sites or on the highway for equipment breakdown. Must be able to perform troubleshooting and overhauling on Non Standard Equipment like different types of engines, transmission, different makes of tractor heads, etc. or where there is No Part Book Manuals available for the equipment. Ability to identify and stock right spares inventory while going through parts manual. Education / Qualifications: Preference will be given to candidates having High School or Technical Trade Certificate or Diploma. 6 - 8 years relevant experience in an oil field company. Must have Kuwait Light / Heavy Duty Driving License. Interested candidates please upload a copy of your CV.

#J-18808-Ljbffr

**General Maintenance Technician (Night Shift
- Must Be Available To Work Nights)**

**American International University - **Kuwait City**

**Duties**:

- Performing routine maintenance around the building such as fixing structural damage, for example, window, door, or wall repair.
- Repairing broken or leaking plumbing to avoid water damage and restore full use of water fixtures.
- Supervision of contractors when needed.
- Will assist and guide the other technicians when needed.
- Working on damaged electrical wiring when a shortage or severed wire occurs.
- Maintaining the building HVAC equipment to keep climate control in the facility functioning properly.
- Fixing potential safety hazards to avoid injuries
- Painting the building when old paint has become faded or chipped
- Carpentry ability to handle basic repairs around the building
- Grounds keeping if the facility contains lawns or other outdoor areas in need of maintenance
- Interpersonal skills to interact with employees or residents of the building in a pleasant manner
- Attention to detail to ensure that all jobs are completed in an exemplary manner and any potential hazards or warning signs of problems are not overlooked
- Physical stamina to handle a full shift of being active and working on the building.

**About American International University**:
AIU is a new institution of higher education in Kuwait whose first student cohort was admitted in fall 2019. It is a private, co-educational institution offering undergraduate degrees based on the American model of higher education, including a comprehensive general education curriculum. Through its educational and student services programming, the University serves the intellectual, cultural, and personal growth of all members of its community. AIU offers degree programs in Engineering, Architecture, and Design, and Business Administration where the language of instruction is English.

How to apply:

Job Summary

Maintenance Technician - Utility is responsible for the operation, maintenance, and troubleshooting of utility systems, including ammonia Cooling Plant, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role ensures equipment efficiency, reliability, and compliance with safety and environmental regulations.

Job Duties Include But Are Not Limited To

1. Perform preventive and corrective maintenance on ammonia cooling plants, boilers, pumps, air compressors, PHE HVAC systems, chillers, cooling towers, and water treatment plants to ensure continuous operation.
2. Diagnose and troubleshoot mechanical and hydraulic issues in utility equipment.
3. Conduct inspections and ensure compliance with health, safety, and environmental standards.
4. Record and report maintenance activities, breakdowns, and spare part usage.
5. Assist in the installation and commissioning of new utility equipment.
6. Monitor energy consumption and recommend efficiency improvements.
7. Follow standard operating procedures (SOPs) and adhere to safety protocols.
8. Collaborate with the production and engineering teams to minimize downtime.
9. Maintain an inventory of tools, spare parts, and consumables required for maintenance tasks.
10. Respond promptly to emergency breakdowns and provide technical support.

Required Qualification

1. Diploma or technical certification in Mechanical, Electrical or Industrial Maintenance.
2. Minimum 3-5 years of experience in utility maintenance within a manufacturing or industrial setting.
3. Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants.
4. Experience with preventive maintenance programs and CMMS (Computerized Maintenance Management Systems).
5. Familiarity with industrial safety standards and regulatory compliance.
6. Ability to read and interpret technical drawings and manuals.
7. Hands-on experience with troubleshooting and repair of electrical and mechanical components.

Required Professional Skills

1. Strong problem-solving and analytical skills.
2. Ability to work independently and as part of a team.
3. Excellent communication and documentation skills.
4. Attention to detail and a proactive approach to maintenance.
5. Willingness to work in shifts and respond to emergency calls.
6. Ability to lift heavy equipment and work in confined spaces.
7. Comfortable working in high-temperature and noisy environments.
8. Standing, climbing, and bending as required during maintenance tasks.
9. Industrial/manufacturing setting with exposure to mechanical and electrical equipment.
10. Requires adherence to safety protocols and use of PPE (Personal Protective Equipment).

#J-18808-Ljbffr

Maintenance Technician Mechanical - Utility

Join to apply for the Maintenance Technician Mechanical - Utility role at KDD .

Job Summary
The Maintenance Technician - Utility is responsible for operating, maintaining, and troubleshooting utility systems such as ammonia cooling plants, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role aims to ensure equipment efficiency, reliability, and compliance with safety and environmental regulations.

Key Responsibilities

• Perform preventive and corrective maintenance on utility equipment to ensure continuous operation.
• Diagnose and troubleshoot mechanical and hydraulic issues.
• Conduct inspections and ensure compliance with safety and environmental standards.
• Record and report maintenance activities, breakdowns, and spare parts usage.
• Assist in the installation and commissioning of new utility equipment.
• Monitor energy consumption and recommend efficiency improvements.
• Follow SOPs and safety protocols.
• Collaborate with production and engineering teams to minimize downtime.
• Maintain inventory of tools, spare parts, and consumables.
• Respond promptly to emergency breakdowns and provide technical support.

Qualifications

• Diploma or technical certification in Mechanical, Electrical, or Industrial Maintenance.
• 3-5 years of experience in utility maintenance in a manufacturing or industrial setting.
• Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants.
• Experience with preventive maintenance programs and CMMS.
• Knowledge of industrial safety standards and regulatory compliance.
• Ability to interpret technical drawings and manuals.
• Hands-on troubleshooting and repair skills for electrical and mechanical components.

Professional Skills

• Problem-solving and analytical skills.
• Ability to work independently and in a team.
• Excellent communication and documentation skills.
• Attention to detail and proactive maintenance approach.
• Willingness to work in shifts and respond to emergencies.
• Ability to lift heavy equipment and work in confined spaces.
• Comfortable working in high-temperature and noisy environments.
• Physical ability to stand, climb, and bend during tasks.

Additional Details

• Seniority level: Mid-Senior level
• Employment type: Full-time
• Job function: Management and Manufacturing
• Industry: Dairy Product Manufacturing

This job posting appears to be active and relevant.

#J-18808-Ljbffr

Job Summary

Maintenance Technician - Utility is responsible for the operation, maintenance, and troubleshooting of utility systems, including ammonia Cooling Plant, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role ensures equipment efficiency, reliability, and compliance with safety and environmental regulations.

Job Duties Include But Are Not Limited To Perform preventive and corrective maintenance on ammonia cooling plants, boilers, pumps, air compressors, PHE HVAC systems, chillers, cooling towers, and water treatment plants to ensure continuous operation. Diagnose and troubleshoot mechanical and hydraulic issues in utility equipment. Conduct inspections and ensure compliance with health, safety, and environmental standards. Record and report maintenance activities, breakdowns, and spare part usage. Assist in the installation and commissioning of new utility equipment. Monitor energy consumption and recommend efficiency improvements. Follow standard operating procedures (SOPs) and adhere to safety protocols. Collaborate with the production and engineering teams to minimize downtime. Maintain an inventory of tools, spare parts, and consumables required for maintenance tasks. Respond promptly to emergency breakdowns and provide technical support. Required Qualification Diploma or technical certification in Mechanical, Electrical or Industrial Maintenance. Minimum 3-5 years of experience in utility maintenance within a manufacturing or industrial setting. Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants. Experience with preventive maintenance programs and CMMS (Computerized Maintenance Management Systems). Familiarity with industrial safety standards and regulatory compliance. Ability to read and interpret technical drawings and manuals. Hands-on experience with troubleshooting and repair of electrical and mechanical components. Required Professional Skills Strong problem-solving and analytical skills. Ability to work independently and as part of a team. Excellent communication and documentation skills. Attention to detail and a proactive approach to maintenance. Willingness to work in shifts and respond to emergency calls. Ability to lift heavy equipment and work in confined spaces. Comfortable working in high-temperature and noisy environments. Standing, climbing, and bending as required during maintenance tasks. Industrial/manufacturing setting with exposure to mechanical and electrical equipment. Requires adherence to safety protocols and use of PPE (Personal Protective Equipment).

#J-18808-Ljbffr