55 Hvac Engineers jobs in Kuwait

Mechanical Engineer

Kuwait City, Al Kuwayt Amentum

Posted 21 days ago

Job Viewed

Tap Again To Close

Job Description

Mechanical Engineer performs engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

Principal Accountabilities:

  1. Designing and implementing cost-effective equipment modifications to help improve safety, reliability and throughput
  2. Performs design work for new construction, renovations and improvement projects for real property facilities
  3. Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards
  4. Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers
  5. Develops cost estimates and time schedules, Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy
  6. Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from Contractors
  7. Prepares Architect and Engineer (A&E) Statements of Work (SOW), serves as a technical representative for negotiation and/or administration of contracts
  8. Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering
  9. Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment
  10. Living and working conditions at the assignment location could be remote and uncomfortable
  11. Long hours, exposure to weather and hazardous conditions
  12. Personnel should be aware of moving on short notice and under adverse conditions.

Minimum Qualifications

  1. Mechanical Engineering degree required; licensed mechanical engineer preferred.
  2. Must have a minimum of four (4) years of design experience and be capable of providing mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design.
  3. Must be proficient in AutoCAD 2012 or later.
  4. Experience in the use of documents relating to the development of projects, contracting, and construction is necessary
  5. Ability to travel domestically and internationally
  6. Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance.

Preferred Qualifications

  1. Excellent communications, effective leadership and interpersonal skills
  2. Able to provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, and interior plumbing design
  3. Working knowledge of Design Review, Project Mobilization, Quality Compliance, QA, Safety, Project Controls, and Capture Management
  4. Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution
  5. Computer literate; can use Microsoft Office and Project, etc

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans and Labor Laws Posters .

#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.

Mechanical Engineer

Kuwait City, Al Kuwayt Abroad Work

Posted today

Job Viewed

Tap Again To Close

Job Description

Overview

Mechanical Engineer position in Al-Kuwait, Kuwait. Location: Al-Kuwait. Salary: 1100 USD. We are seeking a highly motivated and experienced Mechanical Engineer for a position in Al-Kuwait. The successful candidate should possess a minimum of 2 years of experience working in a mechanical engineering environment.

Responsibilities
  • Developing mechanical components and systems, including the design, fabrication, assembly, testing and installation of equipment.
Qualifications
  • Minimum 2 years of experience in a mechanical engineering environment.
  • Experience with mechanical design software, such as AutoCAD and SolidWorks.
  • Knowledge of material science and manufacturing processes.
  • Ability to work independently to solve complex problems in a timely manner.
  • Excellent communication skills and the ability to work collaboratively with other engineers and departments.
  • Willing to consider candidates from abroad for this position.

If you feel that you meet the requirements for this position, please submit your resume for consideration.

#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.

Mechanical Engineer

Kuwait City, Al Kuwayt Abroad Work

Posted today

Job Viewed

Tap Again To Close

Job Description

Overview

Mechanical Engineer job vacancy in Al-Kuwait Kuwait for unskilled worker. Job Summary: We are looking for a motivated and enthusiastic Mechanical Engineer to join our team in Al-Kuwait. We offer a salary of 1000 for the position and are open to considering applications from immigrants seeking employment in this field. This role requires minimal work experience and offers the opportunity to work with a well-established and forward-thinking organisation.

Benefits

At our organisation, we strive to provide a supportive and collaborative work environment that encourages creativity and growth in our employees. Our Mechanical engineers benefit from access to cutting edge tools and technology as well as excellent training opportunities to ensure they are set up for success in their role.

Responsibilities/Duties
  • As a Mechanical Engineer, your main duties will include but not be limited to: designing systems, components and products; producing drawings; testing prototypes; analysing data; writing reports; liaising with clients; maintaining records; and staying up-to-date with industry developments.
  • You must be able to work independently as well as part of a team.
Requirements
  • an undergraduate degree or equivalent in mechanical engineering or a related field.
  • an understanding of engineering principles.
  • the ability to use relevant software such as CAD/CAM packages.
  • excellent problem solving skills.
  • strong communication abilities both orally and written in English (other languages are beneficial).
  • the ability to work under pressure and meet tight deadlines.
  • the capacity for self-management and organisation.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.

Mechanical Engineer

Kuwait City, Al Kuwayt Abroad Work

Posted today

Job Viewed

Tap Again To Close

Job Description

Overview

Mechanical Engineer job vacancy in Al-Kuwait Kuwait. We are looking for a talented and experienced Mechanical Engineer to join our team in Al-Kuwait. The successful candidate must have a good working knowledge of mechanical engineering principles, as well as excellent problem-solving and critical thinking abilities.


Responsibilities

  • The ideal candidate will be able to design, develop and test mechanical components and systems in order to ensure they meet quality standards and customer requirements.


Qualifications

  • A Bachelor's degree or equivalent in Mechanical Engineering, with at least 5 years' experience in the field.

  • A Master's degree or higher is desirable but not essential.

  • Strong technical skills in stress analysis, fluid dynamics, thermodynamics, heat
This advertiser has chosen not to accept applicants from your region.

Mechanical Engineer

Kuwait City, Al Kuwayt Abroad Work

Posted today

Job Viewed

Tap Again To Close

Job Description

Overview

Job title: Mechanical Engineer

Location: Al-Kuwait, Kuwait

Salary: 1000 KD

We are looking for a Mechanical Engineer to join our team in Al-Kuwait. The ideal candidate will have at least one year of work experience in a related field and be able to demonstrate an understanding of the principles of mechanical engineering. The position requires excellent technical skills, problem-solving abilities, and the ability to manage multiple projects simultaneously.

Responsibilities
  • Designing, developing, testing, and evaluating systems that involve motion and energy
This advertiser has chosen not to accept applicants from your region.

Mechanical Engineer

Kuwait City, Al Kuwayt Abroad Work

Posted today

Job Viewed

Tap Again To Close

Job Description

Overview

Mechanical Engineer job vacancy in Al-Kuwait Kuwait for unskilled workers. Al-Kuwait is seeking a Mechanical Engineer to join our team. The ideal candidate should be experienced and capable of understanding complex technical concepts, and able to communicate them effectively with other team members.

Responsibilities
  • Developing, constructing, testing, and maintaining mechanical devices or equipment.
  • Research and development of new products or services to identify potential improvements and solve problems.
  • Overseeing the installation and maintenance of machinery to ensure it is operating correctly.
  • Able to communicate complex technical concepts effectively with other team members.
Qualifications
  • Degree in Mechanical Engineering or a related field and demonstrated experience in similar roles.
  • Knowledge of CAD/CAM software is an advantage.
  • Good problem-solving skills, and strong communication and interpersonal skills.

We are offering a salary of 1500 for this position and are willing to consider applications from foreign candidates. If you think you have the necessary qualifications for this role then we would love to hear from you!

#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.

Mechanical Engineer

PAE Government Services Inc.

Posted 25 days ago

Job Viewed

Tap Again To Close

Job Description

workfromhome

Mechanical Engineer performs engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

Principal Accountabilities:

Designing and implementing cost-effective equipment modifications to help improve safety, reliability and throughput

Performs design work for new construction, renovations and improvement projects for real property facilities

Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards

Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers

Develops cost estimates and time schedules, Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy

Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from Contractors

Prepares Architect and Engineer (A&E) Statements of Work (SOW), serves as a technical representative for negotiation and/or administration of contracts

Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering

Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment

Living and working conditions at the assignment location could be remote and uncomfortable

Long hours, exposure to weather and hazardous conditions

Personnel should be aware of moving on short notice and under adverse conditions.

Minimum Qualifications

Mechanical Engineering degree required; licensed mechanical engineer preferred.

Must have a minimum of four (4) years of design experience and be capable of providing mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design.

Must be proficient in AutoCAD 2012 or later.

Experience in the use of documents relating to the development of projects, contracting, and construction is necessary

Ability to travel domestically and internationally

Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance.

Preferred Qualifications

Excellent communications, effective leadership and interpersonal skills

Able to provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, and interior plumbing design

Working knowledge of Design Review, Project Mobilization, Quality Compliance, QA, Safety, Project Controls, and Capture Management

Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution

Computer literate; can use Microsoft Office and Project, etc

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans and Labor Laws Posters .

Welcome back! We encourage you to check on the status of your current job applications with us. You can also search for a list of our current job openings and see if there are any new positions that might be a good fit for you. Thank you for continued interest in employment with Amentum .

About Us

For more than 100 years, Amentum has tackled the world’s toughest challenges to deliver agile and steadfast solutions to the U.S. government and its allies. With more than 50,000 employees on all seven continents and in more than 60 countries, Amentum delivers a broad range of operational support services to meet the critical needs of our clients. Our headquarters are in Chantilly, VA. Find us online at

If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis.

Amentum has become aware of unauthorized individuals who are falsely using the Amentum name and /or logo in an attempt to solicit fees from potential job seekers. These deceptive and unauthorized individuals are soliciting money, promising placement in a position with Amentum. Please note any communication requesting any amount of money in exchange for employment with Amentum is fraudulent. These communications do not originate from Amentum and are not associated with the recruitment process.

Amentum and its affiliates never charge candidates fees or payments of any kind in order to secure employment. As a precaution, we recommend you do not disclose personal or financial details to anyone as a response to an unsolicited email, social media, or dating website request.

Amentum will never as ask for a placement fee or any other fee to expedite the hiring process. If you are contacted by anyone offering employment with Amentum, you should never be asked to pay a fee for recruiting. Amentum personnel will always send email from an identifiable corporate

This advertiser has chosen not to accept applicants from your region.
Be The First To Know

About the latest Hvac engineers Jobs in Kuwait !

Mechanical Engineer

Kuwait City, Al Kuwayt Amentum

Posted 20 days ago

Job Viewed

Tap Again To Close

Job Description

**Mechanical Engineer** performs engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
**Principal Accountabilities:**
+ Designing and implementing cost-effective equipment modifications to help improve safety, reliability and throughput
+ Performs design work for new construction, renovations and improvement projects for real property facilities
+ Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards
+ Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers
+ Develops cost estimates and time schedules, Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy
+ Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from Contractors
+ Prepares Architect and Engineer (A&E) Statements of Work (SOW), serves as a technical representative for negotiation and/or administration of contracts
+ Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering
+ Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment
+ Living and working conditions at the assignment location could be remote and uncomfortable
+ Long hours, exposure to weather and hazardous conditions
+ Personnel should be aware of moving on short notice and under adverse conditions.
**Minimum Qualifications**
+ Mechanical Engineering degree required; licensed mechanical engineer preferred.
+ Must have a minimum of four (4) years of design experience and be capable of providing mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design.
+ Must be proficient in AutoCAD 2012 or later.
+ Experience in the use of documents relating to the development of projects, contracting, and construction is necessary
+ Ability to travel domestically and internationally
+ Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance.
**Preferred Qualifications**
+ Excellent communications, effective leadership and interpersonal skills
+ Able to provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, and interior plumbing design
+ Working knowledge of Design Review, Project Mobilization, Quality Compliance, QA, Safety, Project Controls, and Capture Management
+ Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution
+ Computer literate; can use Microsoft Office and Project, etc
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans ( and Labor Laws Posters ( .
This advertiser has chosen not to accept applicants from your region.

Mechanical Engineer

New
Kuwait City, Al Kuwayt Abroad Work

Posted today

Job Viewed

Tap Again To Close

Job Description

Overview

Mechanical Engineer job vacancy in Al-Kuwait Kuwait. We are looking for a talented and experienced Mechanical Engineer to join our team in Al-Kuwait. The successful candidate must have a good working knowledge of mechanical engineering principles, as well as excellent problem-solving and critical thinking abilities. Responsibilities

The ideal candidate will be able to design, develop and test mechanical components and systems in order to ensure they meet quality standards and customer requirements. Qualifications

A Bachelor's degree or equivalent in Mechanical Engineering, with at least 5 years' experience in the field. A Master's degree or higher is desirable but not essential. Strong technical skills in stress analysis, fluid dynamics, thermodynamics, heat
This advertiser has chosen not to accept applicants from your region.

Mechanical Engineer

New
Kuwait City, Al Kuwayt Abroad Work

Posted today

Job Viewed

Tap Again To Close

Job Description

Overview Mechanical Engineer job vacancy in Al-Kuwait Kuwait for unskilled workers. Al-Kuwait is seeking a Mechanical Engineer to join our team. The ideal candidate should be experienced and capable of understanding complex technical concepts, and able to communicate them effectively with other team members.

Responsibilities

Developing, constructing, testing, and maintaining mechanical devices or equipment.

Research and development of new products or services to identify potential improvements and solve problems.

Overseeing the installation and maintenance of machinery to ensure it is operating correctly.

Able to communicate complex technical concepts effectively with other team members.

Qualifications

Degree in Mechanical Engineering or a related field and demonstrated experience in similar roles.

Knowledge of CAD/CAM software is an advantage.

Good problem-solving skills, and strong communication and interpersonal skills.

We are offering a salary of 1500 for this position and are willing to consider applications from foreign candidates. If you think you have the necessary qualifications for this role then we would love to hear from you!

#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
 

Nearby Locations

Other Jobs Near Me

Industry

  1. request_quote Accounting
  2. work Administrative
  3. eco Agriculture Forestry
  4. smart_toy AI & Emerging Technologies
  5. school Apprenticeships & Trainee
  6. apartment Architecture
  7. palette Arts & Entertainment
  8. directions_car Automotive
  9. flight_takeoff Aviation
  10. account_balance Banking & Finance
  11. local_florist Beauty & Wellness
  12. restaurant Catering
  13. volunteer_activism Charity & Voluntary
  14. science Chemical Engineering
  15. child_friendly Childcare
  16. foundation Civil Engineering
  17. clean_hands Cleaning & Sanitation
  18. diversity_3 Community & Social Care
  19. construction Construction
  20. brush Creative & Digital
  21. currency_bitcoin Crypto & Blockchain
  22. support_agent Customer Service & Helpdesk
  23. medical_services Dental
  24. medical_services Driving & Transport
  25. medical_services E Commerce & Social Media
  26. school Education & Teaching
  27. electrical_services Electrical Engineering
  28. bolt Energy
  29. local_mall Fmcg
  30. gavel Government & Non Profit
  31. emoji_events Graduate
  32. health_and_safety Healthcare
  33. beach_access Hospitality & Tourism
  34. groups Human Resources
  35. precision_manufacturing Industrial Engineering
  36. security Information Security
  37. handyman Installation & Maintenance
  38. policy Insurance
  39. code IT & Software
  40. gavel Legal
  41. sports_soccer Leisure & Sports
  42. inventory_2 Logistics & Warehousing
  43. supervisor_account Management
  44. supervisor_account Management Consultancy
  45. supervisor_account Manufacturing & Production
  46. campaign Marketing
  47. build Mechanical Engineering
  48. perm_media Media & PR
  49. local_hospital Medical
  50. local_hospital Military & Public Safety
  51. local_hospital Mining
  52. medical_services Nursing
  53. local_gas_station Oil & Gas
  54. biotech Pharmaceutical
  55. checklist_rtl Project Management
  56. shopping_bag Purchasing
  57. home_work Real Estate
  58. person_search Recruitment Consultancy
  59. store Retail
  60. point_of_sale Sales
  61. science Scientific Research & Development
  62. wifi Telecoms
  63. psychology Therapy
  64. pets Veterinary
View All Hvac Engineers Jobs