25 Aircraft Mechanic jobs in Kuwait

The Aircraft Mechanic II -

Powerplant/Engine Back Shop Mechanic (T700/701C/D, T55-714)

with experience in all three MDS UH60, CH47 & AH64

performs and inspects aviation unit ( AVUM ), intermediate ( AVIM ) and

depot maintenance

on assigned aircraft systems. Perform maintenance and repair of major assemblies and subassemblies of the T700/701C/D, T55-714 and auxiliary power units. Inspect engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks. Perform blade blending and blade replacement in cold section of powerplants. Replace or repair worn or damaged components, such as generators, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves. Ability to Perform hot section inspections and determine replacement of hot section components (GG rotors, stators, fuel injectors, igniters, power turbine.) Disassemble and inspect parts for wear, cracks, security, or other defects. Perform engine removal, replacement, reinstallation, and quick-change assembly (QCA) maintenance tasks. High School Graduate or equivalent is required. Five (5) years of recent applicable aircraft maintenance experience is required. With A&P

Two (2) years aviation maintenance experience, and Two (2) years' experience on MDS

UH60, CH47, & AH64

is required. Without A&P,

must have Three (3) years aviation maintenance experience, Three (3) years rotary wing aircraft experience and Two (2) years on the assigned Mission Design Series UH-60, AH-64, CH-47 (MDS) to qualify. All experience must be within the Five (5) most recent years. Must be in possession of a

Valid U.S. Passport

for travel internationally. Passport must contain a minimum of 6 Blank pages and 2 years remaining before expiration date. Ability to obtain/maintain a US Government Security Clearance (NAC-I T1) Public Trust.

US Citizenship is Required

to obtain a Security Clearance, and for facility access to this site. Able to clear CENTCOM MOD Physicals requirement for deployment. (Attend CRC). Must be able to obtain Kuwait Visa. Knowledge & Skills General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Thorough knowledge of aircraft electrical and avionics component and system troubleshooting, repair procedures and replacement of parts. Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Physical Requirements/Working Environment May work in aircraft maintenance hangar or outside. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure. May be exposed to extreme noise from turbine and jet engine aircraft. May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft. Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift up to 50 pounds. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to see imperfections, micrometer readings and other small scales. Must be able to communicate by voice and detect sound by ear. Must be able to distinguish color and judge three-dimensional depth. May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc. Company Industry Defence Military Government Department / Functional Area Keywords Aircraft Mechanic II Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at People Looking for Aircraft Mechanic Jobs also searched #J-18808-Ljbffr

Job description

M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for a Chinook Mechanic to join our team.

The role

Based in Camp Buehring, Kuwait you’ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as a Chinook Mechanic, working in an exciting environment.

Knowledge and Skills Required

To perform this job successfully, an individual must be able to fulfil each of the following essential duties:

1. You must have minimum 3 years’ experience working on the desired aircraft.
2. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
3. Broad knowledge of aircraft sheet metal/structural modifications and repair.
4. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers.
5. Working knowledge of technical publications and logistics information systems.
6. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks.
7. Participate in maintenance test flights and operation checks as required.
8. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics.
9. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.

Deployment package and additional benefits

Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline:

1. 12 month rolling contracts.
2. Weekly pay is extremely competitive.
3. Sourced accommodation.
4. Holiday entitlement.
5. Living quarter allowance.
6. Sign on bonus.
7. Annual completion bonus.
8. All tools will be included in this contract.

This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time.

Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract.

* Please note, the deployment package varies from role to role and will depend on your current circumstances.

#J-18808-Ljbffr

Job description M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for a Chinook Mechanic to join our team.

The role

Based in Camp Buehring, Kuwait you’ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as a Chinook Mechanic, working in an exciting environment.

Knowledge and Skills Required

To perform this job successfully, an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years’ experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.

Deployment package and additional benefits

Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline: 12 month rolling contracts. Weekly pay is extremely competitive. Sourced accommodation. Holiday entitlement. Living quarter allowance. Sign on bonus. Annual completion bonus. All tools will be included in this contract.

This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time.

Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract.

* Please note, the deployment package varies from role to role and will depend on your current circumstances.

#J-18808-Ljbffr

Aircraft Mechanic II (Sheetmetal) - Buehring, Kuwait Aircraft Mechanic II (Sheetmetal) - Buehring, Kuwait

R0139368

On Site

Kuwait City, Al Asimah Governate, Kuwait

Full time

The Aircraft Mechanic II (Sheetmetal) maintains, modifies, and integrates the aircraft structure and its parts.

• Maintain, modify, and install the various components of aircraft sheet metal.
• Repair, rework, install and fabricate the complex aircraft structural assemblies, both internal and external.
• Lay out plans, fabrication, and installation models for modifications.
• Balance rotary-wing aircraft controls and apply primers/paints on aircraft surfaces.
• Fabricate structural parts using metal-forming techniques and fiberglass materials
• Perform checks; carry out inspections and removal of components.
• Study technical manuals, blueprints, and engineering drawings.
• Provide assistance to aircraft technicians and mechanics on various tasks.
• Remove and disassemble defective parts of the aircraft.
• Perform final checks on assembly and installation of parts that were replaced.
• Maintain and keep track of all the maintenance records.
• Adhere to company policies and safety programs.
• Maintain the supplies and perform preventive maintenance.
  
  

Minimum Requirements

• High School Diploma or equivalent.
• U.S. military technical school or specialized training course is desired, certification of education level is required.
• Aircraft/Blade painting experience preferred.
• Three (3) or more years aviation maintenance experience within the past Five (5) years on the mission design series (MDS) UH60, AH64, CH47.
• Or A&P license and Two (2) years aviation maintenance experience within the past Five (5) years on the mission design series UH60, AH64, CH47 (MDS).
• Must be in possession of a U.S. Passport and be able to travel internationally with minimum 6 blank pages and 1.5 plus year validity on expiration date of passport.
• Must be able to obtain and maintain facility Public Trust NAC-I. Note: US Citizenship is required for facility Public Trust NAC-I at this work location.
• Must be able to pass CENTCOM medical requirements.
• Must be able to obtain Kuwait PCC & Visa.
  
  

Knowledge & Skills

• Thorough knowledge of aircraft sheet metal/structural modifications and repair.
• Basic knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
• Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
• Working knowledge of technical publications and Logistics Information Systems.
• Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.
• Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.
• The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
  
  

Physical Requirements/Working Environment

• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.
• Must be able to climb stairs, ramps, ladders, and work stands.
• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
• May be required to lift heavy objects whose weight may exceed 50 pounds.
• Must be able to type using a standard keyboard to communicate through e-mail and various software applications.
• Will handle dirty parts and lubricants.
• Will be required to wear proper Personal Protective Equipment (PPE).
• Must be able to pass a Respirator Physical and Fit Test qualification.
• May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.
• Must be able to lift/push/pull minimum of 50 pounds.
• May work in maintenance shop or outside.
• Must be able to work in a shop where the environment is drafty, noisy, and dirty.
• May be exposed to extreme noise from operating equipment.
• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.
• May be expected to work in austere environments and all-weather conditions
  
  

Job Id: 4sKwyxVrk+JZA/pSNDpg7y4axSi/6n4nyxG8s5xo+7P5z5LdN8Cc3s3XuZpgJ+jLViul2bR0lYHbPbPQkXYH5Bqxom0vKAQ0JLOMUXe0kOjAFWWx6MzTJryWXOBuFgAyfAPCrdv70QD4oQl3U8LjYeDoFS37A21/wzm4ks3mpo7EWwv7TQGBx5qTp2iAicOLq4eqHr6F

Aircraft Mechanic 2 (Sheetmetal / Structures) UH60, AH64, CH47 - Buehring, Kuwait KC-130J Aircraft Mechanic III- Kuwait City, Kuwait

Kuwait City, Al Asimah, Kuwait 5 days ago

Aircraft Mechanic AM-2 (UH-60, CH-47, AH-64 Sheetmetal/Structures) - Camp Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 1 month ago

KC-130J Aircraft Mechanic III- Kuwait City, Kuwait Aircraft Mechanic II (Powerplant/ Engine T700/T701C/D, T55-714) UH60, CH47 & AH64 - Ali Al Salem, Kuwait

Kuwait City, Al Asimah, Kuwait 2 months ago

Aircraft Mechanic I (UH-60) - Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 3 days ago

Aviation Life Support Equipment Mechanic (ALSE) - KC-130J Program - Kuwait City, Kuwait Aircraft Mechanic 2 (Sheetmetal / Structures) UH60, AH64, CH47 - Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 1 month ago

Aviation Life Support Equipment (ALSE) Technician - Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 3 months ago

Aircraft Mechanic II (Sheetmetal) - Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 1 month ago

Aircraft Mechanic 2 (Prop & Rotor) - Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 1 month ago

Kuwait City, Al Asimah, Kuwait 2 months ago

#J-18808-Ljbffr

The **Aircraft Mechanic II (Sheetmetal)** maintains, modifies, and integrates the aircraft structure and its parts.
+ Maintain, modify, and install the various components of aircraft sheet metal.
+ Repair, rework, install and fabricate the complex aircraft structural assemblies, both internal and external.
+ Lay out plans, fabrication, and installation models for modifications.
+ Balance rotary-wing aircraft controls and apply primers/paints on aircraft surfaces.
+ Fabricate structural parts using metal-forming techniques and fiberglass materials
+ Perform checks; carry out inspections and removal of components.
+ Study technical manuals, blueprints, and engineering drawings.
+ Provide assistance to aircraft technicians and mechanics on various tasks.
+ Remove and disassemble defective parts of the aircraft.
+ Perform final checks on assembly and installation of parts that were replaced.
+ Maintain and keep track of all the maintenance records.
+ Adhere to company policies and safety programs.
+ Maintain the supplies and perform preventive maintenance.
**Minimum Requirements**
+ High School Diploma or equivalent.
+ U.S. military technical school or specialized training course is desired, certification of education level is required.
+ Aircraft/Blade painting experience preferred.
+ Three (3) or more years aviation maintenance experience within the past Five (5) years on the mission design series (MDS) **UH60, AH64, CH47** .
+ Or A&P license and Two (2) years aviation maintenance experience within the past Five (5) years on the mission design series **UH60, AH64, CH47** (MDS).
+ Must be in possession of a U.S. Passport and be able to travel internationally with minimum 6 blank pages and 1.5 plus year validity on expiration date of passport.
+ Must be able to obtain and maintain facility Public Trust NAC-I. Note: **US Citizenship** is required for facility Public Trust NAC-I at this work location.
+ Must be able to pass CENTCOM medical requirements.
+ Must be able to obtain Kuwait PCC & Visa.
**Knowledge & Skills**
+ Thorough knowledge of aircraft sheet metal/structural modifications and repair.
+ Basic knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
+ Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
+ Working knowledge of technical publications and Logistics Information Systems.
+ Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.
+ Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.
+ The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
**Physical Requirements/Working Environment**
+ Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.
+ Must be able to climb stairs, ramps, ladders, and work stands.
+ Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
+ May be required to lift heavy objects whose weight may exceed 50 pounds.
+ Must be able to type using a standard keyboard to communicate through e-mail and various software applications.
+ Will handle dirty parts and lubricants.
+ Will be required to wear proper Personal Protective Equipment (PPE).
+ Must be able to pass a Respirator Physical and Fit Test qualification.
+ May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.
+ Must be able to lift/push/pull minimum of 50 pounds.
+ May work in maintenance shop or outside.
+ Must be able to work in a shop where the environment is drafty, noisy, and dirty.
+ May be exposed to extreme noise from operating equipment.
+ May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.
+ May be expected to work in austere environments and all-weather conditions
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .

The

Aircraft Mechanic II (Sheetmetal)

maintains, modifies, and integrates the aircraft structure and its parts. Maintain, modify, and install the various components of aircraft sheet metal.

Repair, rework, install and fabricate the complex aircraft structural assemblies, both internal and external.

Lay out plans, fabrication, and installation models for modifications.

Balance rotary-wing aircraft controls and apply primers/paints on aircraft surfaces.

Fabricate structural parts using metal-forming techniques and fiberglass materials

Perform checks; carry out inspections and removal of components.

Study technical manuals, blueprints, and engineering drawings.

Provide assistance to aircraft technicians and mechanics on various tasks.

Remove and disassemble defective parts of the aircraft.

Perform final checks on assembly and installation of parts that were replaced.

Maintain and keep track of all the maintenance records.

Adhere to company policies and safety programs.

Maintain the supplies and perform preventive maintenance.

Minimum Requirements High School Diploma or equivalent.

U.S. military technical school or specialized training course is desired, certification of education level is required.

Aircraft/Blade painting experience preferred.

Three (3) or more years aviation maintenance experience within the past Five (5) years on the mission design series (MDS)

UH60, AH64, CH47 .

Or A&P license and Two (2) years aviation maintenance experience within the past Five (5) years on the mission design series

UH60, AH64, CH47

(MDS).

Must be in possession of a U.S. Passport and be able to travel internationally with minimum 6 blank pages and 1.5 plus year validity on expiration date of passport.

Must be able to obtain and maintain facility Public Trust NAC-I. Note:

US Citizenship

is required forfacility Public Trust NAC-I at this work location.

Must be able to pass CENTCOM medical requirements.

Must be able to obtain Kuwait PCC & Visa.

Knowledge & Skills Thorough knowledge of aircraft sheet metal/structural modifications and repair.

Basic knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.

Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.

Working knowledge of technical publications and Logistics Information Systems.

Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.

Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.

The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.

Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.

Must be able to climb stairs, ramps, ladders, and work stands.

Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.

May be required to lift heavy objects whose weight may exceed 50 pounds.

Must be able to type using a standard keyboard to communicate through e-mail and various software applications.

Will handle dirty parts and lubricants.

Will be required to wear proper Personal Protective Equipment (PPE).

Must be able to pass a Respirator Physical and Fit Test qualification.

May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.

Must be able to lift/push/pull minimum of 50 pounds.

May work in maintenance shop or outside.

Must be able to work in a shop where the environment is drafty, noisy, and dirty.

May be exposed to extreme noise from operating equipment.

May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.

May be expected to work in austere environments and all-weather conditions

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters .

#J-18808-Ljbffr

Aircraft Mechanic II (Sheetmetal) - Buehring, Kuwait

Aircraft Mechanic II (Sheetmetal) - Buehring, Kuwait

R0139368

On Site

Kuwait City, Al Asimah Governate, Kuwait

Full time

The

Aircraft Mechanic II (Sheetmetal)

maintains, modifies, and integrates the aircraft structure and its parts.

Maintain, modify, and install the various components of aircraft sheet metal. Repair, rework, install and fabricate the complex aircraft structural assemblies, both internal and external. Lay out plans, fabrication, and installation models for modifications. Balance rotary-wing aircraft controls and apply primers/paints on aircraft surfaces. Fabricate structural parts using metal-forming techniques and fiberglass materials Perform checks; carry out inspections and removal of components. Study technical manuals, blueprints, and engineering drawings. Provide assistance to aircraft technicians and mechanics on various tasks. Remove and disassemble defective parts of the aircraft. Perform final checks on assembly and installation of parts that were replaced. Maintain and keep track of all the maintenance records. Adhere to company policies and safety programs. Maintain the supplies and perform preventive maintenance.

Minimum Requirements

High School Diploma or equivalent. U.S. military technical school or specialized training course is desired, certification of education level is required. Aircraft/Blade painting experience preferred. Three (3) or more years aviation maintenance experience within the past Five (5) years on the mission design series (MDS) UH60, AH64, CH47. Or A&P license and Two (2) years aviation maintenance experience within the past Five (5) years on the mission design series UH60, AH64, CH47 (MDS). Must be in possession of a U.S. Passport and be able to travel internationally with minimum 6 blank pages and 1.5 plus year validity on expiration date of passport. Must be able to obtain and maintain facility Public Trust NAC-I. Note: US Citizenship is required for facility Public Trust NAC-I at this work location. Must be able to pass CENTCOM medical requirements. Must be able to obtain Kuwait PCC & Visa.

Knowledge & Skills

Thorough knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.

Physical Requirements/Working Environment

Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions

Job Id: 4sKwyxVrk+JZA/pSNDpg7y4axSi/6n4nyxG8s5xo+7P5z5LdN8Cc3s3XuZpgJ+jLViul2bR0lYHbPbPQkXYH5Bqxom0vKAQ0JLOMUXe0kOjAFWWx6MzTJryWXOBuFgAyfAPCrdv70QD4oQl3U8LjYeDoFS37A21/wzm4ks3mpo7EWwv7TQGBx5qTp2iAicOLq4eqHr6F Aircraft Mechanic 2 (Sheetmetal / Structures) UH60, AH64, CH47 - Buehring, Kuwait

KC-130J Aircraft Mechanic III- Kuwait City, Kuwait

Kuwait City, Al Asimah, Kuwait 5 days ago Aircraft Mechanic AM-2 (UH-60, CH-47, AH-64 Sheetmetal/Structures) - Camp Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 1 month ago KC-130J Aircraft Mechanic III- Kuwait City, Kuwait

Aircraft Mechanic II (Powerplant/ Engine T700/T701C/D, T55-714) UH60, CH47 & AH64 - Ali Al Salem, Kuwait

Kuwait City, Al Asimah, Kuwait 2 months ago Aircraft Mechanic I (UH-60) - Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 3 days ago Aviation Life Support Equipment Mechanic (ALSE) - KC-130J Program - Kuwait City, Kuwait

Aircraft Mechanic 2 (Sheetmetal / Structures) UH60, AH64, CH47 - Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 1 month ago Aviation Life Support Equipment (ALSE) Technician - Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 3 months ago Aircraft Mechanic II (Sheetmetal) - Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 1 month ago Aircraft Mechanic 2 (Prop & Rotor) - Buehring, Kuwait

Kuwait City, Al Asimah, Kuwait 1 month ago Kuwait City, Al Asimah, Kuwait 2 months ago

#J-18808-Ljbffr

Aircraft Mechanic I (UH-60) - Buehring, Kuwait page is loadedAircraft Mechanic I (UH-60) - Buehring, Kuwait Apply remote type On-site locations OCONUS-Kuwait time type Full time posted on Posted 2 Days Ago job requisition id R0144044

The UH-60 Aircraft Mechanic AM-I (UH-60) troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.

• Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.

• Service and lubricate aircraft and subsystems.

• Safely prepare aircraft for inspections and maintenance checks and services.

• Perform scheduled inspections and assist in performing special inspections.

• Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.

• Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.

• Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.

• Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.

• Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.

• Participate in maintenance test flights and operation checks as required.

• Perform other duties as requested.

Minimum Requirements:

• High School Diploma or equivalent required.

• A valid up-to-date FAA A&P certificate is preferred.

• If No FAA A&P certificate; candidate Must have Three (3) years aviation maintenance experience, with a minimum of two (2) years on the assigned UH-60 Mission Design Series (MDS).

• All experience must be within the Six (6) most recent years.

• Must be in possession of a U.S. Passport with a min. 2 plus years validity and be able to travel internationally.

• Must be able to obtain and maintain facility Public Trust NAC-I. Note: US Citizenship is required forfacility Public Trust NAC-I at this work location.

• Must be able to pass the CENTCOM Medical requirement to deploy.

• Must be able to obtain Kuwait Visa

Knowledge & Skills

• General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.

• Basic knowledge of aircraft sheet metal/structural modifications and repair.

• General knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.

• Working knowledge of technical publications and Logistics Information Systems.

• Able to prioritize workloads to maintain schedules on assigned projects.

• Participate in maintenance test flights and operation checks as required.

• Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.

• The incumbent receives technical guidance, as required, from supervisor or higher-level technician, and may be required to make entries in aircraft logs and records.

Physical Requirements/Working Environment

• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.

• Must be able to climb stairs, ramps, ladders, and work stands.

• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.

• May be required to lift heavy objects whose weight may exceed 50 pounds.

• Must be able to type using a standard keyboard to communicate through e-mail and various software applications.

• Will handle dirty parts and lubricants.

• Will be required to wear proper Personal Protective Equipment (PPE).

• Must be able to pass a Respirator Physical and Fit Test qualification.

• May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.

• Must be able to lift/push/pull minimum of 50 pounds.

• May work in maintenance shop or outside.

• Must be able to work in a shop where the environment is drafty, noisy, and dirty.

• May be exposed to extreme noise from operating equipment.

• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.

• Occasionally lifts objects up to 50 pounds.

• Most heavy lifting is accomplished through the use of mechanical devices.

• May be expected to work in austere environments and all-weather conditions.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language atLabor Laws Posters .

Welcome

Welcome back! We encourage you to check on the status of your current job applications with us. You can also search for a list of our current job openings and see if there are any new positions that might be a good fit for you. Thank you for continued interest in employment with Amentum .

About Us

For more than 100 years, Amentum has tackled the world’s toughest challenges to deliver agile and steadfast solutions to the U.S. government and its allies. With more than 50,000 employees on all seven continents and in more than 60 countries, Amentum delivers a broad range of operational support services to meet the critical needs of our clients. Our headquarters are in Chantilly, VA. Find us online at

If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis.

Amentum has become aware of unauthorized individuals who are falsely using the Amentum name and /or logo in an attempt to solicit fees from potential job seekers. These deceptive and unauthorized individuals are soliciting money, promising placement in a position with Amentum. Please note any communication requesting any amount of money in exchange for employment with Amentum is fraudulent. These communications do not originate from Amentum and are not associated with the recruitment process.

Amentum and its affiliates never charge candidates fees or payments of any kind in order to secure employment. As a precaution, we recommend you do not disclose personal or financial details to anyone as a response to an unsolicited email, social media, or dating website request.

Amentum will never as ask for a placement fee or any other fee to expedite the hiring process. If you are contacted by anyone offering employment with Amentum, you should never be asked to pay a fee for recruiting. Amentum personnel will always send email from an identifiable corporate account (ending in @amentum.com) and never from a public email account like Yahoo!, Google, Gmail, or Hotmail. If you are contacted regarding a fraudulent employment proposal, we encourage you to alert your local law enforcement agency/police authority.

#J-18808-Ljbffr

**The UH-60** **Aircraft Mechanic AM-I (UH-60)** troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.
+ Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.
+ Service and lubricate aircraft and subsystems.
+ Safely prepare aircraft for inspections and maintenance checks and services.
+ Perform scheduled inspections and assist in performing special inspections.
+ Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.
+ Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.
+ Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.
+ Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.
+ Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.
+ Participate in maintenance test flights and operation checks as required.
+ Perform other duties as requested.
**Minimum Requirements:**
+ High School Diploma or equivalent required.
+ A valid up-to-date FAA A&P certificate is preferred.
+ If No FAA A&P certificate; candidate Must have Three (3) years aviation maintenance experience, with a minimum of two (2) years on the assigned **UH-60** Mission Design Series (MDS).
+ All experience must be within the Six (6) most recent years.
+ Must be in possession of a U.S. Passport with a min. 2 plus years validity and be able to travel internationally.
+ Must be able to obtain and maintain facility Public Trust NAC-I. Note: **US Citizenship is required** for facility Public Trust NAC-I at this work location.
+ Must be able to pass the CENTCOM Medical requirement to deploy.
+ Must be able to obtain Kuwait Visa
**Knowledge & Skills**
+ General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
+ Basic knowledge of aircraft sheet metal/structural modifications and repair.
+ General knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
+ Working knowledge of technical publications and Logistics Information Systems.
+ Able to prioritize workloads to maintain schedules on assigned projects.
+ Participate in maintenance test flights and operation checks as required.
+ Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.
+ The incumbent receives technical guidance, as required, from supervisor or higher-level technician, and may be required to make entries in aircraft logs and records.
**Physical Requirements/Working Environment**
+ Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.
+ Must be able to climb stairs, ramps, ladders, and work stands.
+ Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
+ May be required to lift heavy objects whose weight may exceed 50 pounds.
+ Must be able to type using a standard keyboard to communicate through e-mail and various software applications.
+ Will handle dirty parts and lubricants.
+ Will be required to wear proper Personal Protective Equipment (PPE).
+ Must be able to pass a Respirator Physical and Fit Test qualification.
+ May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.
+ Must be able to lift/push/pull minimum of 50 pounds.
+ May work in maintenance shop or outside.
+ Must be able to work in a shop where the environment is drafty, noisy, and dirty.
+ May be exposed to extreme noise from operating equipment.
+ May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.
+ Occasionally lifts objects up to 50 pounds.
+ Most heavy lifting is accomplished through the use of mechanical devices.
+ May be expected to work in austere environments and all-weather conditions.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .