44 Junior Engineer Lifting jobs in Kuwait

Job Summary

Execution of maintenance activities in the plant during the shift in line with the departmental goals / requirements.

Job Responsibilities

Overview

•Review the ‘Shift handing over’ with prior shift engineer to know the status of job tickets running /completed /balance in maintenance.

•Take the physical attendance of the workmen.

•Conduct Tool box meeting at the start of each shift as per the Guidelines of ‘Tool Box Meetings’

•Allocate the job assignments to the peers working under him & issue the related Work Order details / documents & explain any criticalities involved.

•Physically meet the Production Shift In charge for further clarity on priorities for production related breakdown urgencies.

•Ensure that all breakdown Notifications are attended immediately & there is no stoppage to Production activities.

•Prepare and conduct ‘Routine Inspection’ of the Machines, Equipments & Utilities.

•Execute ‘Preventative Maintenance’ (PM) as per the pre defined & approved PM schedule.

•Assist the Production Engineers to ensure that ‘Autonomous Maintenance’ is being followed at all work stations.

•Pl ensure that Data entry & Notification documentation is viewed & maintained on a hourly basis in SAP.

•Ensure that the required ‘Machine Breakdown’ data is also recorded & handed over in work station ‘Log books’.

•Hourly basis routine checks / monitoring of Machines / machinery are carried out as per the Maintenance schedules.

•Ensure that all employees working under him use the required PPEs & adhere to all safety rules / practices of the Co.

•Ensure that the maintenance activities are at the required speed and Quality levels as per the Company standards.

•Seek all required support from Superiors to achieve the required targets.

•Check & validate, the individual breakdown Completion reports submitted by workmen.

•Ensure that SAP notifications are received for thebreakdowns of all the critical machines ( Machines which affect the production flow on break down )

•Prepare a consolidated shift wise Work completion Report & report to the Maintenance Manager / HOD.

•Ensure Participation & play a support Role in team efforts for 5S & EHS initiatives.

•Ensure that immediate reporting of any kind of ‘Near Miss’ / ‘First Aid’ cases / ‘Safety Incidents’ to the Safety officer & concerned Superiors is done.

Skills

Candidate Requirements

Knowledge :

•Conversant with Engineering and schematic drawings, Good technical Skills relevant to hydraulic, electrical and pneumatic trouble shooting.

•Basic / working knowledge of PLC , CNC, DRIVES , Hydraulic and pneumatic components.

•Knowledge of Computers like MS office.

•Working knowledge of AutoCAD is preferable.

•Conversant with operation and hands on experience in repair processes of FCAW, SMAW, SAW machines.

•Basic knowledge of LEAN manufacturing techniques & at par knowledge in Operational Excellence methodology.

•‘White Belt certification’ in Six sigma is a MUST.

•Well conversant with use of Production Tools, jigs and fixtures and its setting procedures.

•Working exp in SAP Environment is advantageous.

•Working exposure with ISO 9001, OHSAS 18001 are preferable.

•Good command on languages Hindi & English.

Skills :

•Good ATTITUDE,

•Discipline on duty & Punctuality,

•Respect & practice “Safety First” principle.

•Possess “Sense of Urgency”

•Good practical and technical skills,

•Good Communication skills

•The ability to work fast and effectively under pressure

•The ability to manage a varied workload

•Good problem-solving skills

•The initiative to work on your own or as part of a team

•An awareness of health and safety legislation.

•Good eyesight and normal color vision

#J-18808-Ljbffr

Mechanical Engineer performs engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.

Principal Accountabilities:

Designing and implementing cost-effective equipment modifications to help improve safety, reliability and throughput

Performs design work for new construction, renovations and improvement projects for real property facilities

Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards

Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers

Develops cost estimates and time schedules, Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy

Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from Contractors

Prepares Architect and Engineer (A&E) Statements of Work (SOW), serves as a technical representative for negotiation and/or administration of contracts

Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering

Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment

Living and working conditions at the assignment location could be remote and uncomfortable

Long hours, exposure to weather and hazardous conditions

Personnel should be aware of moving on short notice and under adverse conditions.

Minimum Qualifications

Mechanical Engineering degree required; licensed mechanical engineer preferred.

Must have a minimum of four (4) years of design experience and be capable of providing mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design.

Must be proficient in AutoCAD 2012 or later.

Experience in the use of documents relating to the development of projects, contracting, and construction is necessary

Ability to travel domestically and internationally

Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance.

Preferred Qualifications

Excellent communications, effective leadership and interpersonal skills

Able to provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, and interior plumbing design

Working knowledge of Design Review, Project Mobilization, Quality Compliance, QA, Safety, Project Controls, and Capture Management

Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution

Computer literate; can use Microsoft Office and Project, etc

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans and Labor Laws Posters .

Welcome back! We encourage you to check on the status of your current job applications with us. You can also search for a list of our current job openings and see if there are any new positions that might be a good fit for you. Thank you for continued interest in employment with Amentum .

About Us

For more than 100 years, Amentum has tackled the world’s toughest challenges to deliver agile and steadfast solutions to the U.S. government and its allies. With more than 50,000 employees on all seven continents and in more than 60 countries, Amentum delivers a broad range of operational support services to meet the critical needs of our clients. Our headquarters are in Chantilly, VA. Find us online at

If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis.

Amentum has become aware of unauthorized individuals who are falsely using the Amentum name and /or logo in an attempt to solicit fees from potential job seekers. These deceptive and unauthorized individuals are soliciting money, promising placement in a position with Amentum. Please note any communication requesting any amount of money in exchange for employment with Amentum is fraudulent. These communications do not originate from Amentum and are not associated with the recruitment process.

Amentum and its affiliates never charge candidates fees or payments of any kind in order to secure employment. As a precaution, we recommend you do not disclose personal or financial details to anyone as a response to an unsolicited email, social media, or dating website request.

Amentum will never as ask for a placement fee or any other fee to expedite the hiring process. If you are contacted by anyone offering employment with Amentum, you should never be asked to pay a fee for recruiting. Amentum personnel will always send email from an identifiable corporate account (ending in @amentum.com) and never from a public email account like Yahoo!, Google, Gmail, or Hotmail. If you are contacted regarding a fraudulent employment proposal, we encourage you to alert your local law enforcement agency/police authority.

#J-18808-Ljbffr

**Mechanical Engineer** performs engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
**Principal Accountabilities:**
+ Designing and implementing cost-effective equipment modifications to help improve safety, reliability and throughput
+ Performs design work for new construction, renovations and improvement projects for real property facilities
+ Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards
+ Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers
+ Develops cost estimates and time schedules, Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy
+ Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from Contractors
+ Prepares Architect and Engineer (A&E) Statements of Work (SOW), serves as a technical representative for negotiation and/or administration of contracts
+ Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering
+ Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment
+ Living and working conditions at the assignment location could be remote and uncomfortable
+ Long hours, exposure to weather and hazardous conditions
+ Personnel should be aware of moving on short notice and under adverse conditions.
**Minimum Qualifications**
+ Mechanical Engineering degree required; licensed mechanical engineer preferred.
+ Must have a minimum of four (4) years of design experience and be capable of providing mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design.
+ Must be proficient in AutoCAD 2012 or later.
+ Experience in the use of documents relating to the development of projects, contracting, and construction is necessary
+ Ability to travel domestically and internationally
+ Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance.
**Preferred Qualifications**
+ Excellent communications, effective leadership and interpersonal skills
+ Able to provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, and interior plumbing design
+ Working knowledge of Design Review, Project Mobilization, Quality Compliance, QA, Safety, Project Controls, and Capture Management
+ Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution
+ Computer literate; can use Microsoft Office and Project, etc
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans ( and Labor Laws Posters ( .

Job Summary Execution of maintenance activities in the plant during the shift in line with the departmental goals / requirements. Job Responsibilities Overview •Review the ‘Shift handing over’ with prior shift engineer to know the status of job tickets running /completed /balance in maintenance. •Take the physical attendance of the workmen. •Conduct Tool box meeting at the start of each shift as per the Guidelines of ‘Tool Box Meetings’ •Allocate the job assignments to the peers working under him & issue the related Work Order details / documents & explain any criticalities involved. •Physically meet the Production Shift In charge for further clarity on priorities for production related breakdown urgencies. •Ensure that all breakdown Notifications are attended immediately & there is no stoppage to Production activities. •Prepare and conduct ‘Routine Inspection’ of the Machines, Equipments & Utilities. •Execute ‘Preventative Maintenance’ (PM) as per the pre defined & approved PM schedule. •Assist the Production Engineers to ensure that ‘Autonomous Maintenance’ is being followed at all work stations. •Pl ensure that Data entry & Notification documentation is viewed & maintained on a hourly basis in SAP. •Ensure that the required ‘Machine Breakdown’ data is also recorded & handed over in work station ‘Log books’. •Hourly basis routine checks / monitoring of Machines / machinery are carried out as per the Maintenance schedules. •Ensure that all employees working under him use the required PPEs & adhere to all safety rules / practices of the Co. •Ensure that the maintenance activities are at the required speed and Quality levels as per the Company standards. •Seek all required support from Superiors to achieve the required targets. •Check & validate, the individual breakdown Completion reports submitted by workmen. •Ensure that SAP notifications are received for thebreakdowns of all the critical machines ( Machines which affect the production flow on break down ) •Prepare a consolidated shift wise Work completion Report & report to the Maintenance Manager / HOD. •Ensure Participation & play a support Role in team efforts for 5S & EHS initiatives. •Ensure that immediate reporting of any kind of ‘Near Miss’ / ‘First Aid’ cases / ‘Safety Incidents’ to the Safety officer & concerned Superiors is done. Skills Candidate Requirements Knowledge : •Conversant with Engineering and schematic drawings, Good technical Skills relevant to hydraulic, electrical and pneumatic trouble shooting. •Basic / working knowledge of PLC , CNC, DRIVES , Hydraulic and pneumatic components. •Knowledge of Computers like MS office. •Working knowledge of AutoCAD is preferable. •Conversant with operation and hands on experience in repair processes of FCAW, SMAW, SAW machines. •Basic knowledge of LEAN manufacturing techniques & at par knowledge in Operational Excellence methodology. •‘White Belt certification’ in Six sigma is a MUST. •Well conversant with use of Production Tools, jigs and fixtures and its setting procedures. •Working exp in SAP Environment is advantageous. •Working exposure with ISO 9001, OHSAS 18001 are preferable. •Good command on languages Hindi & English. Skills : •Good ATTITUDE, •Discipline on duty & Punctuality, •Respect & practice “Safety First” principle. •Possess “Sense of Urgency” •Good practical and technical skills, •Good Communication skills •The ability to work fast and effectively under pressure •The ability to manage a varied workload •Good problem-solving skills •The initiative to work on your own or as part of a team •An awareness of health and safety legislation. •Good eyesight and normal color vision

#J-18808-Ljbffr

Mechanical Engineer

performs engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems. Principal Accountabilities: Designing and implementing cost-effective equipment modifications to help improve safety, reliability and throughput Performs design work for new construction, renovations and improvement projects for real property facilities Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers Develops cost estimates and time schedules, Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from Contractors Prepares Architect and Engineer (A&E) Statements of Work (SOW), serves as a technical representative for negotiation and/or administration of contracts Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment Living and working conditions at the assignment location could be remote and uncomfortable Long hours, exposure to weather and hazardous conditions Personnel should be aware of moving on short notice and under adverse conditions. Minimum Qualifications Mechanical Engineering degree required; licensed mechanical engineer preferred. Must have a minimum of four (4) years of design experience and be capable of providing mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design. Must be proficient in AutoCAD 2012 or later. Experience in the use of documents relating to the development of projects, contracting, and construction is necessary Ability to travel domestically and internationally Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance. Preferred Qualifications Excellent communications, effective leadership and interpersonal skills Able to provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, and interior plumbing design Working knowledge of Design Review, Project Mobilization, Quality Compliance, QA, Safety, Project Controls, and Capture Management Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution Computer literate; can use Microsoft Office and Project, etc Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans and Labor Laws Posters . Welcome back! We encourage you to check on the status of your current job applications with us. You can also search for a list of our current job openings and see if there are any new positions that might be a good fit for you. Thank you for continued interest in employment with Amentum . About Us

For more than 100 years, Amentum has tackled the world’s toughest challenges to deliver agile and steadfast solutions to the U.S. government and its allies. With more than 50,000 employees on all seven continents and in more than 60 countries, Amentum delivers a broad range of operational support services to meet the critical needs of our clients. Our headquarters are in Chantilly, VA. Find us online at If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Amentum has become aware of unauthorized individuals who are falsely using the Amentum name and /or logo in an attempt to solicit fees from potential job seekers. These deceptive and unauthorized individuals are soliciting money, promising placement in a position with Amentum. Please note any communication requesting any amount of money in exchange for employment with Amentum is fraudulent. These communications do not originate from Amentum and are not associated with the recruitment process. Amentum and its affiliates never charge candidates fees or payments of any kind in order to secure employment. As a precaution, we recommend you do not disclose personal or financial details to anyone as a response to an unsolicited email, social media, or dating website request. Amentum will never as ask for a placement fee or any other fee to expedite the hiring process. If you are contacted by anyone offering employment with Amentum, you should never be asked to pay a fee for recruiting. Amentum personnel will always send email from an identifiable corporate account (ending in @amentum.com) and never from a public email account like Yahoo!, Google, Gmail, or Hotmail. If you are contacted regarding a fraudulent employment proposal, we encourage you to alert your local law enforcement agency/police authority.

#J-18808-Ljbffr

Mechanical Engineer

performs engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems. Principal Accountabilities: Designing and implementing cost-effective equipment modifications to help improve safety, reliability and throughput Performs design work for new construction, renovations and improvement projects for real property facilities Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers Develops cost estimates and time schedules, Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from Contractors Prepares Architect and Engineer (A&E) Statements of Work (SOW), serves as a technical representative for negotiation and/or administration of contracts Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment Living and working conditions at the assignment location could be remote and uncomfortable Long hours, exposure to weather and hazardous conditions Personnel should be aware of moving on short notice and under adverse conditions. Minimum Qualifications Mechanical Engineering degree required; licensed mechanical engineer preferred. Must have a minimum of four (4) years of design experience and be capable of providing mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design. Must be proficient in AutoCAD 2012 or later. Experience in the use of documents relating to the development of projects, contracting, and construction is necessary Ability to travel domestically and internationally Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance. Preferred Qualifications Excellent communications, effective leadership and interpersonal skills Able to provide mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, and interior plumbing design Working knowledge of Design Review, Project Mobilization, Quality Compliance, QA, Safety, Project Controls, and Capture Management Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution Computer literate; can use Microsoft Office and Project, etc Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at

EEO including Disability/Protected Veterans

and

Labor Laws Posters .

#J-18808-Ljbffr

**Ali Al Salem Airbase, Kuwait**

**Duties and Responsibilities**
- Designing and implementing cost-effective equipment modifications to help improve safety, reliability and throughput
- Performs design work for new construction, renovations and improvement projects for real property facilities
- Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards
- Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers
- Develops cost estimates and time schedules, Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy
- Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from Contractors
- Prepares Architect and Engineer (A&E) Statements of Work (SOW), serves as a technical representative for negotiation and/or administration of contracts
- Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering
- Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment
- Secure the cooperation of other crafts/trades supervisors
- May perform maintenance and repair work, at times
- Comply with health, safety and environmental rules and procedures
- Perform work in a manner that enhances the safety of the work environment
- Perform other qualified duties as assigned

**Experience & Qualifications**
- Undergraduate Mechanical Engineering degree from an accredited higher educational institution is required
- US Professional Mechanical Engineer's licensure preferred
- Must have a minimum of four (4) years of design experience and be capable of providing mechanical design service including determination of HVAC loads, equipment selection, duct sizing and routing, interior plumbing design, and exterior plumbing design.
- Must be proficient in AutoCAD 2012 or later
- Experience in the use of documents relating to the development of projects, contracting, and construction is necessary
- Working knowledge of Design Review, Project Mobilization, Quality Compliance, QA, Safety, Project Controls, and Capture Management
- Computer literate, Microsoft Office 365 Suite and MS Project
- Must be a US Citizen
- Current US Passport required
- Must have an active US Department of Defense Secret Security Clearance
- Must be able to travel domestically and internationally
- Must pass a Fit-for-Duty Physical Examination

**_AIM World Services, Inc. is an Equal Employment Opportunity Employer_

Leads and mentors a design group and is responsible for large scale projects from bidding to delivery.
Reporting directly to the Discipline Lead, this team member contributes to the development of the company by supporting the Directors in the progressive evolution of SSH’s design philosophy, research activities and technical development.

Duties and Responsibilities:

• Support Discipline Lead with operational responsibilities.
• Contribute to preparation of bids.
• Lead the design team throughout the design stages.
• Responsible for key design input at early design phases and for general design leadership during the course of the project.
• Contribute from the onset of a project, to the design of innovative and progressive design solutions that reconcile SSH and client’s goals and priorities while fostering opportunities for design excellence.
• Make appropriate value judgements with respect to corrective work that supports the design concept and performance goals of the project.
• To perform and direct material and building systems research and participate in the coordination and preparation of project specifications.
• Set an example of leadership among team leaders.
• Participate in marketing and business development.
• Act as the client’s point of contact for design related issues.
• Act as the project’s design coordinator and contributes (fully or partially) to the overall design management activities.
• Conduct performance evaluation reviews to subordinate (junior) team members.
• Take initiatives to develop design manuals, standard design documents, presentations, etc. to increase efficiencies, knowledge and awareness across the wider engineering community.

Qualities and Skills:

• Developed Engineering Design skills.
• Extensive project experience.
• Flexibility and attitude towards company objectives.
• Cordial relationships with clients and stakeholders.
• Understanding of SSH’s commercial management of projects.
• Understanding of risk management.
• Understanding of scope definition and scope interface.
• Developed presentation skills.
• Detailed knowledge of SSH’s standards, policies, codes and procedures and ability to transmit the same to others.
• Full knowledge of Statutory Authorities requirements, knowledge of codes, regulations and submission requirements.
• Developed knowledge of Sustainable Design principles.
• Ability and will to mentor and provide support to junior staff members and spread knowledge across the wider architectural community.
• Ability and will to update knowledge.
• Excellent command of English (written and spoken). Knowledge of other languages is an added value.

Digital Platforms:

Qualifications:

Degree and or Masters in Mechanical Engineering
Professional registration of an internationally recognised institution i.e CIBSE, ASHRAE is highly desirable and a distinct advantage

Job Type: Full Time

Apply for this position

Full Name *

Email *

Phone *

Upload CV/Resume * Allowed Type(s): .pdf, .doc, .docx

By using this form you agree with the storage and handling of your data by this website. *

#J-18808-Ljbffr

Responsibilities:

1. Reviews Contractor's staff qualifications and CVs to ensure that they are qualified for the Project at hand.
2. Puts into place quality assurance procedures to ensure that procedures for review and inspection of installations are maintained throughout the project period.
3. Reviews materials and equipment to ensure that they are in accordance with the specifications. Coordinates with the Head of Department/Design Staff and obtains their comments prior to actioning.
4. Reviews shop drawings to ensure that they are in accordance with the design and that they are coordinated. Where applicable, receives feedback from the Site Engineer/Inspector or design office and incorporates their comments.
5. Reviews method statements to ensure that the Contractor proposal is feasible and will achieve the intended purpose.
6. Inspects deliveries/installed/constructed work to ensure that it is in accordance with the shop drawings and the specifications.
7. Monitors Contractor's submittals to local authorities and ensures that they are carried out in a timely manner in accordance with the contract document.
8. Meets with Local Authorities along with Contractor where required and attends site visits by Local Authorities in order to clarify ambiguities and queries to facilitate a smooth approval process.
9. Responds to Contractor's request for information to clarify ambiguities.
10. Reviews and approves Contractor's payment in line with estimated work completion so that he can be paid for the actual work done.
11. Reviews and approves Contractor's change order request and variation so that legitimacy and extent can be confirmed. Prepares and issues job site instructions for new works and modifications to the tender contract.
12. Attends regular meetings with the Construction team and the Client to report on progress and help resolve issues where they arise.
13. Ensures that issues related to local codes, such as health and safety executives and environmental impact, are addressed.

Minimum Requirements:

B.Sc/B.Eng in Mechanical/Environmental and Building Services Engineering.
Should be a member of Kuwait Society of Engineers for certain (Government) type Projects.
Minimum 12 years or more in relevant quality projects.

About The Company:

Having been in business for 50 years, we have accumulated unparalleled knowledge, skill, and creativity. We use our expertise to develop a truly tailored innovative and creative solution that is in line with our clients' specific requirements. We don't sell a "house style" - that's not our style.

The firm has its headquarters in Kuwait and has completed a wide range of projects locally and throughout the Middle East. A recent survey conducted by the World Architecture Magazine shows that SSH is currently ranked as number fifty-two in the world.

We treat our employees as valued members of the team. We believe in the power of every single person who works here and the individual expertise they bring to a project. We reinforce the worth of every individual by giving them the room to excel.

SSH is registered in Kuwait with the Ministry of Planning, Ministry of Public Works, Ministry of Commerce and Industry, Ministry of Defense, the Kuwait Municipality, and many private enterprises.

The Firm is registered with international and bi-lateral agencies such as the United Nations Development Programme, the International Road Federation, the Arab Fund for Social and Economic Development, the Kuwait Fund for Arab Economic Development, the Committee for Reconstruction and Development in Lebanon.

#J-18808-Ljbffr