48 Industrial Equipment jobs in Kuwait
Mechanical Maintenance Supervisor
Al ahmadi, Al Ahmadi
KWT Steel
Posted today
Job Viewed
Job Description
We are seeking for a talented and exceptionally skilled Mechanical Maintenance Supervisor to join our multicultural and diverse team in Kuwait. Reporting to the Chief Engineer of Mechanical & Utility, you will be monitoring and controlling day to day shift activities, repairs, attending planned and unplanned shutdowns. Inspection and maintenance of EAF/LF/CCM/ EOT Cranes / RMHS /FTP/ Fans/Pumps/Air Compressors. Assisting his superior in finalizing jobs for planned maintenance day, annual shutdowns and controlling the same to complete within the time schedule.
**Duties may include but will not be limited to**:
***
- Closely supervising, executing and controlling the maintenance activities (preventive and corrective maintenance) with assistance from Hydraulic & Pneumatic Specialist, Mechanical Technician, and Welder as per PM work orders from SAP
- Inspection of responsible / allocated area equipment, reporting any major abnormality to the higher level and recording it in the logbook and check lists of SAP
- Execution of corrective action to eliminate the identified abnormalities with assistance from Hydraulic & Pneumatic Specialist, Mechanical Technician, Welder
- Attending breakdowns, minimizing delays and unplanned shutdowns.
- Implementing the instructions from the management.
- Coordinating with other departments and working as a team.
- Carrying-out daily shift activities and follow-through the problems.
- Proper maintenance of equipment / facilities and carrying out repair works and keeping spares ready.
- Studying the system / equipment drawings, selecting proper tools for special / critical jobs, safekeeping and working effectively to reduce the maintenance cost.
- Responsible to have proper housekeeping and cleaning of Equipment, tools and work areas and cleaning of equipment areas after any maintenance job.
- Following rules & regulations of the company, such as company annual leave, medical leave, working hours, shift schedule, off days and safety instructions and also the rules specified by the Authority / Ministry.
- Performs other tasks and duties that maybe assigned by his superior.
**DESIRED JOB QUALIFICATION, SKILLS AND EXPERIENCE**
**Education**:
- At least a Bachelor Degree in Mechanical Engineering
**Skills**:
- Ability to read Mechanical drawings, knowledge of hydraulics, pneumatics, bearings, machine alignments. Good knowledge in the maintenance and troubleshooting of EAF/ LF/ CCM/ EOT Cranes/ Raw material handling systems/FTP/ Fans/Pumps/Air Compressors etc.
**Experience**:
- At least 6-8 years in Maintenance department carrying out maintenance jobs in a similar size steel plant or Metallurgical / Heavy industries.
**Duties may include but will not be limited to**:
***
- Closely supervising, executing and controlling the maintenance activities (preventive and corrective maintenance) with assistance from Hydraulic & Pneumatic Specialist, Mechanical Technician, and Welder as per PM work orders from SAP
- Inspection of responsible / allocated area equipment, reporting any major abnormality to the higher level and recording it in the logbook and check lists of SAP
- Execution of corrective action to eliminate the identified abnormalities with assistance from Hydraulic & Pneumatic Specialist, Mechanical Technician, Welder
- Attending breakdowns, minimizing delays and unplanned shutdowns.
- Implementing the instructions from the management.
- Coordinating with other departments and working as a team.
- Carrying-out daily shift activities and follow-through the problems.
- Proper maintenance of equipment / facilities and carrying out repair works and keeping spares ready.
- Studying the system / equipment drawings, selecting proper tools for special / critical jobs, safekeeping and working effectively to reduce the maintenance cost.
- Responsible to have proper housekeeping and cleaning of Equipment, tools and work areas and cleaning of equipment areas after any maintenance job.
- Following rules & regulations of the company, such as company annual leave, medical leave, working hours, shift schedule, off days and safety instructions and also the rules specified by the Authority / Ministry.
- Performs other tasks and duties that maybe assigned by his superior.
**DESIRED JOB QUALIFICATION, SKILLS AND EXPERIENCE**
**Education**:
- At least a Bachelor Degree in Mechanical Engineering
**Skills**:
- Ability to read Mechanical drawings, knowledge of hydraulics, pneumatics, bearings, machine alignments. Good knowledge in the maintenance and troubleshooting of EAF/ LF/ CCM/ EOT Cranes/ Raw material handling systems/FTP/ Fans/Pumps/Air Compressors etc.
**Experience**:
- At least 6-8 years in Maintenance department carrying out maintenance jobs in a similar size steel plant or Metallurgical / Heavy industries.
This advertiser has chosen not to accept applicants from your region.
0
Sales Engineer (Industrial Supplies Division-Cleaning Equipment)
boodai trading
Posted 4 days ago
Job Viewed
Job Description
The Sales Engineer will focus on selling industrial cleaning equipment, including sweepers and
scrubbers, within the assigned region. This role involves managing existing clients, identifying new
business opportunities, and driving sales growth by offering effective cleaning solutions tailored to
customer needs.
Key Commitment
Adhere to company sales policy and reporting system as required by direct manager.
Report any non-compliance operations.
Commit to save cost and work towards company’s interest in every possible operation.
Maintenance of confidential information.
Duties and Essential Job Functions
Ability to understand market requirements/opportunities, thereby enhancing growth of
company’s product market share.
Proper identification/forecast/development/implementation of marketing strategy, targeting
potential sales.
Knowledge of variety of heavy equipment brands/products. Ability to provide product,
service, or equipment technical and engineering information by answering client’s
questions and requests.
Establishing new, and maintaining existing, relationships with customers.
Calculating & submitting client quotations by conferring with technical support staff and
senior management.
Negotiating tender and contract terms and conditions to meet both client and company
needs.
Preparation of technical product presentations to clients, negotiating and closing sales by
agreeing terms and conditions in accordance with the management perspective.
Handling daily sales report, collections & update inputs in system.
Understanding client’s requirement and accordingly preparation of technical proposal that
satisfy and meet their needs in terms or quality, price and delivery.
Meeting regular sales target and coordinating sales project.
Skills
Technical Sales, Convincing & Negotiation skills.
Excellent communication skills in Arabic & English.
Customer-centric, able to build & maintain satisfied customer relationships and is profit
focused.
Must have valid Kuwaiti Driving License.
Competencies
A solid technical/mechanical background.
Product Knowledge.
Deal closure skills.
Good persuasive skills.
Good presentation skills.
Organized and goal oriented.
Education and Qualifications:
Bachelor’s degree in Mechanical Engineering or Business Administration.
1-2 years of experience in Sales, preferably in Industrial Equipment & Cleaning Equipment
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
1
Sales Engineer (Industrial Supplies Division-Cleaning Equipment)
Kuwait City, Al Kuwayt
boodai trading
Posted 5 days ago
Job Viewed
Job Description
The Sales Engineer will focus on selling industrial cleaning equipment, including sweepers and scrubbers, within the assigned region. This role involves managing existing clients, identifying new business opportunities, and driving sales growth by offering effective cleaning solutions tailored to customer needs. Key Commitment Adhere to company sales policy and reporting system as required by direct manager. Report any non-compliance operations. Commit to save cost and work towards company’s interest in every possible operation. Maintenance of confidential information. Duties and Essential Job Functions Ability to understand market requirements/opportunities, thereby enhancing growth of company’s product market share. Proper identification/forecast/development/implementation of marketing strategy, targeting potential sales. Knowledge of variety of heavy equipment brands/products. Ability to provide product, service, or equipment technical and engineering information by answering client’s questions and requests. Establishing new, and maintaining existing, relationships with customers. Calculating & submitting client quotations by conferring with technical support staff and senior management. Negotiating tender and contract terms and conditions to meet both client and company needs. Preparation of technical product presentations to clients, negotiating and closing sales by agreeing terms and conditions in accordance with the management perspective. Handling daily sales report, collections & update inputs in system. Understanding client’s requirement and accordingly preparation of technical proposal that satisfy and meet their needs in terms or quality, price and delivery. Meeting regular sales target and coordinating sales project. Skills
Technical Sales, Convincing & Negotiation skills. Excellent communication skills in Arabic & English. Customer-centric, able to build & maintain satisfied customer relationships and is profit focused. Must have valid Kuwaiti Driving License. Competencies
A solid technical/mechanical background. Product Knowledge. Deal closure skills. Good persuasive skills. Good presentation skills. Organized and goal oriented. Education and Qualifications:
Bachelor’s degree in Mechanical Engineering or Business Administration. 1-2 years of experience in Sales, preferably in Industrial Equipment & Cleaning Equipment
#J-18808-Ljbffr
Technical Sales, Convincing & Negotiation skills. Excellent communication skills in Arabic & English. Customer-centric, able to build & maintain satisfied customer relationships and is profit focused. Must have valid Kuwaiti Driving License. Competencies
A solid technical/mechanical background. Product Knowledge. Deal closure skills. Good persuasive skills. Good presentation skills. Organized and goal oriented. Education and Qualifications:
Bachelor’s degree in Mechanical Engineering or Business Administration. 1-2 years of experience in Sales, preferably in Industrial Equipment & Cleaning Equipment
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
2
Maintenance Technician Mechanical - Utility
Farwaniya
HealthCare Dynamics Gen. Trading Company W.L.L
Posted 11 days ago
Job Viewed
Job Description
Job Summary
Maintenance Technician - Utility is responsible for the operation, maintenance, and troubleshooting of utility systems, including ammonia Cooling Plant, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role ensures equipment efficiency, reliability, and compliance with safety and environmental regulations.
Job Duties Include But Are Not Limited To
- Perform preventive and corrective maintenance on ammonia cooling plants, boilers, pumps, air compressors, PHE HVAC systems, chillers, cooling towers, and water treatment plants to ensure continuous operation.
- Diagnose and troubleshoot mechanical and hydraulic issues in utility equipment.
- Conduct inspections and ensure compliance with health, safety, and environmental standards.
- Record and report maintenance activities, breakdowns, and spare part usage.
- Assist in the installation and commissioning of new utility equipment.
- Monitor energy consumption and recommend efficiency improvements.
- Follow standard operating procedures (SOPs) and adhere to safety protocols.
- Collaborate with the production and engineering teams to minimize downtime.
- Maintain an inventory of tools, spare parts, and consumables required for maintenance tasks.
- Respond promptly to emergency breakdowns and provide technical support.
Required Qualification
- Diploma or technical certification in Mechanical, Electrical or Industrial Maintenance.
- Minimum 3-5 years of experience in utility maintenance within a manufacturing or industrial setting.
- Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants.
- Experience with preventive maintenance programs and CMMS (Computerized Maintenance Management Systems).
- Familiarity with industrial safety standards and regulatory compliance.
- Ability to read and interpret technical drawings and manuals.
- Hands-on experience with troubleshooting and repair of electrical and mechanical components.
Required Professional Skills
- Strong problem-solving and analytical skills.
- Ability to work independently and as part of a team.
- Excellent communication and documentation skills.
- Attention to detail and a proactive approach to maintenance.
- Willingness to work in shifts and respond to emergency calls.
- Ability to lift heavy equipment and work in confined spaces.
- Comfortable working in high-temperature and noisy environments.
- Standing, climbing, and bending as required during maintenance tasks.
- Industrial/manufacturing setting with exposure to mechanical and electrical equipment.
- Requires adherence to safety protocols and use of PPE (Personal Protective Equipment).
This advertiser has chosen not to accept applicants from your region.
3
Maintenance Technician Mechanical - Utility
Farwaniya
KDD
Posted 11 days ago
Job Viewed
Job Description
Maintenance Technician Mechanical - Utility
Join to apply for the Maintenance Technician Mechanical - Utility role at KDD .
Job Summary
The Maintenance Technician - Utility is responsible for operating, maintaining, and troubleshooting utility systems such as ammonia cooling plants, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role aims to ensure equipment efficiency, reliability, and compliance with safety and environmental regulations.
Key Responsibilities
- Perform preventive and corrective maintenance on utility equipment to ensure continuous operation.
- Diagnose and troubleshoot mechanical and hydraulic issues.
- Conduct inspections and ensure compliance with safety and environmental standards.
- Record and report maintenance activities, breakdowns, and spare parts usage.
- Assist in the installation and commissioning of new utility equipment.
- Monitor energy consumption and recommend efficiency improvements.
- Follow SOPs and safety protocols.
- Collaborate with production and engineering teams to minimize downtime.
- Maintain inventory of tools, spare parts, and consumables.
- Respond promptly to emergency breakdowns and provide technical support.
Qualifications
- Diploma or technical certification in Mechanical, Electrical, or Industrial Maintenance.
- 3-5 years of experience in utility maintenance in a manufacturing or industrial setting.
- Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants.
- Experience with preventive maintenance programs and CMMS.
- Knowledge of industrial safety standards and regulatory compliance.
- Ability to interpret technical drawings and manuals.
- Hands-on troubleshooting and repair skills for electrical and mechanical components.
Professional Skills
- Problem-solving and analytical skills.
- Ability to work independently and in a team.
- Excellent communication and documentation skills.
- Attention to detail and proactive maintenance approach.
- Willingness to work in shifts and respond to emergencies.
- Ability to lift heavy equipment and work in confined spaces.
- Comfortable working in high-temperature and noisy environments.
- Physical ability to stand, climb, and bend during tasks.
Additional Details
- Seniority level: Mid-Senior level
- Employment type: Full-time
- Job function: Management and Manufacturing
- Industry: Dairy Product Manufacturing
This job posting appears to be active and relevant.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
4
Maintenance Technician Mechanical - Utility
Al Farwaniyah, Al Farwaniyah
HealthCare Dynamics Gen. Trading Company W.L.L
Posted 4 days ago
Job Viewed
Job Description
Job Summary
Maintenance Technician - Utility is responsible for the operation, maintenance, and troubleshooting of utility systems, including ammonia Cooling Plant, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role ensures equipment efficiency, reliability, and compliance with safety and environmental regulations.
Job Duties Include But Are Not Limited To Perform preventive and corrective maintenance on ammonia cooling plants, boilers, pumps, air compressors, PHE HVAC systems, chillers, cooling towers, and water treatment plants to ensure continuous operation. Diagnose and troubleshoot mechanical and hydraulic issues in utility equipment. Conduct inspections and ensure compliance with health, safety, and environmental standards. Record and report maintenance activities, breakdowns, and spare part usage. Assist in the installation and commissioning of new utility equipment. Monitor energy consumption and recommend efficiency improvements. Follow standard operating procedures (SOPs) and adhere to safety protocols. Collaborate with the production and engineering teams to minimize downtime. Maintain an inventory of tools, spare parts, and consumables required for maintenance tasks. Respond promptly to emergency breakdowns and provide technical support. Required Qualification Diploma or technical certification in Mechanical, Electrical or Industrial Maintenance. Minimum 3-5 years of experience in utility maintenance within a manufacturing or industrial setting. Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants. Experience with preventive maintenance programs and CMMS (Computerized Maintenance Management Systems). Familiarity with industrial safety standards and regulatory compliance. Ability to read and interpret technical drawings and manuals. Hands-on experience with troubleshooting and repair of electrical and mechanical components. Required Professional Skills Strong problem-solving and analytical skills. Ability to work independently and as part of a team. Excellent communication and documentation skills. Attention to detail and a proactive approach to maintenance. Willingness to work in shifts and respond to emergency calls. Ability to lift heavy equipment and work in confined spaces. Comfortable working in high-temperature and noisy environments. Standing, climbing, and bending as required during maintenance tasks. Industrial/manufacturing setting with exposure to mechanical and electrical equipment. Requires adherence to safety protocols and use of PPE (Personal Protective Equipment).
#J-18808-Ljbffr
Maintenance Technician - Utility is responsible for the operation, maintenance, and troubleshooting of utility systems, including ammonia Cooling Plant, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role ensures equipment efficiency, reliability, and compliance with safety and environmental regulations.
Job Duties Include But Are Not Limited To Perform preventive and corrective maintenance on ammonia cooling plants, boilers, pumps, air compressors, PHE HVAC systems, chillers, cooling towers, and water treatment plants to ensure continuous operation. Diagnose and troubleshoot mechanical and hydraulic issues in utility equipment. Conduct inspections and ensure compliance with health, safety, and environmental standards. Record and report maintenance activities, breakdowns, and spare part usage. Assist in the installation and commissioning of new utility equipment. Monitor energy consumption and recommend efficiency improvements. Follow standard operating procedures (SOPs) and adhere to safety protocols. Collaborate with the production and engineering teams to minimize downtime. Maintain an inventory of tools, spare parts, and consumables required for maintenance tasks. Respond promptly to emergency breakdowns and provide technical support. Required Qualification Diploma or technical certification in Mechanical, Electrical or Industrial Maintenance. Minimum 3-5 years of experience in utility maintenance within a manufacturing or industrial setting. Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants. Experience with preventive maintenance programs and CMMS (Computerized Maintenance Management Systems). Familiarity with industrial safety standards and regulatory compliance. Ability to read and interpret technical drawings and manuals. Hands-on experience with troubleshooting and repair of electrical and mechanical components. Required Professional Skills Strong problem-solving and analytical skills. Ability to work independently and as part of a team. Excellent communication and documentation skills. Attention to detail and a proactive approach to maintenance. Willingness to work in shifts and respond to emergency calls. Ability to lift heavy equipment and work in confined spaces. Comfortable working in high-temperature and noisy environments. Standing, climbing, and bending as required during maintenance tasks. Industrial/manufacturing setting with exposure to mechanical and electrical equipment. Requires adherence to safety protocols and use of PPE (Personal Protective Equipment).
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
5
Maintenance Technician Mechanical - Utility
Al Farwaniyah, Al Farwaniyah
KDD
Posted 4 days ago
Job Viewed
Job Description
Maintenance Technician Mechanical - Utility
Join to apply for the
Maintenance Technician Mechanical - Utility
role at
KDD . Job Summary The Maintenance Technician - Utility is responsible for operating, maintaining, and troubleshooting utility systems such as ammonia cooling plants, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role aims to ensure equipment efficiency, reliability, and compliance with safety and environmental regulations. Key Responsibilities Perform preventive and corrective maintenance on utility equipment to ensure continuous operation. Diagnose and troubleshoot mechanical and hydraulic issues. Conduct inspections and ensure compliance with safety and environmental standards. Record and report maintenance activities, breakdowns, and spare parts usage. Assist in the installation and commissioning of new utility equipment. Monitor energy consumption and recommend efficiency improvements. Follow SOPs and safety protocols. Collaborate with production and engineering teams to minimize downtime. Maintain inventory of tools, spare parts, and consumables. Respond promptly to emergency breakdowns and provide technical support. Qualifications Diploma or technical certification in Mechanical, Electrical, or Industrial Maintenance. 3-5 years of experience in utility maintenance in a manufacturing or industrial setting. Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants. Experience with preventive maintenance programs and CMMS. Knowledge of industrial safety standards and regulatory compliance. Ability to interpret technical drawings and manuals. Hands-on troubleshooting and repair skills for electrical and mechanical components. Professional Skills Problem-solving and analytical skills. Ability to work independently and in a team. Excellent communication and documentation skills. Attention to detail and proactive maintenance approach. Willingness to work in shifts and respond to emergencies. Ability to lift heavy equipment and work in confined spaces. Comfortable working in high-temperature and noisy environments. Physical ability to stand, climb, and bend during tasks. Additional Details Seniority level: Mid-Senior level Employment type: Full-time Job function: Management and Manufacturing Industry: Dairy Product Manufacturing This job posting appears to be active and relevant.
#J-18808-Ljbffr
Join to apply for the
Maintenance Technician Mechanical - Utility
role at
KDD . Job Summary The Maintenance Technician - Utility is responsible for operating, maintaining, and troubleshooting utility systems such as ammonia cooling plants, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role aims to ensure equipment efficiency, reliability, and compliance with safety and environmental regulations. Key Responsibilities Perform preventive and corrective maintenance on utility equipment to ensure continuous operation. Diagnose and troubleshoot mechanical and hydraulic issues. Conduct inspections and ensure compliance with safety and environmental standards. Record and report maintenance activities, breakdowns, and spare parts usage. Assist in the installation and commissioning of new utility equipment. Monitor energy consumption and recommend efficiency improvements. Follow SOPs and safety protocols. Collaborate with production and engineering teams to minimize downtime. Maintain inventory of tools, spare parts, and consumables. Respond promptly to emergency breakdowns and provide technical support. Qualifications Diploma or technical certification in Mechanical, Electrical, or Industrial Maintenance. 3-5 years of experience in utility maintenance in a manufacturing or industrial setting. Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants. Experience with preventive maintenance programs and CMMS. Knowledge of industrial safety standards and regulatory compliance. Ability to interpret technical drawings and manuals. Hands-on troubleshooting and repair skills for electrical and mechanical components. Professional Skills Problem-solving and analytical skills. Ability to work independently and in a team. Excellent communication and documentation skills. Attention to detail and proactive maintenance approach. Willingness to work in shifts and respond to emergencies. Ability to lift heavy equipment and work in confined spaces. Comfortable working in high-temperature and noisy environments. Physical ability to stand, climb, and bend during tasks. Additional Details Seniority level: Mid-Senior level Employment type: Full-time Job function: Management and Manufacturing Industry: Dairy Product Manufacturing This job posting appears to be active and relevant.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
Be The First To Know
About the latest Industrial equipment Jobs in Kuwait !
6
Field Service Engineer II
Honeywell
Posted 24 days ago
Job Viewed
Job Description
Join to apply for the Field Service Engineer II role at Honeywell
Join to apply for the Field Service Engineer II role at Honeywell
Get AI-powered advice on this job and more exclusive features.
Job Description
As a Field Service Engineer II, you will have the opportunity to provide advanced technical facilitation and expertise to our customers in the Industrial Automation (IA) business unit.
Job Description
As a Field Service Engineer II, you will have the opportunity to provide advanced technical facilitation and expertise to our customers in the Industrial Automation (IA) business unit.
You will be accountable for troubleshooting and resolving complex technical issue, ensuring the successful implementation of our solutions, and driving customer satisfaction.
You will report directly to our Field Service Engineer Manager, and you'll work out of our Kuwait location as a site support engineer.
Responsibilities
- To ensure efficient delivery of installation, testing, commissioning, troubleshooting, and maintenance services for Honeywell Fire Alarm and Gas Detection Systems at client sites, in line with Honeywell’s standards, local regulations, and project specifications. Troubleshoot system faults, alarms, and perform root cause analysis to restore normal operation. Replace faulty devices and reconfigure panels as needed.
- Documentation & Reporting: Prepare commissioning reports, cause & corrective action reports, test forms, and as-built drawings. Maintain accurate records of service calls, spare part replacements, and system configurations.
- Customer & Project Interface:Liaise with clients, consultants, and contractors for approvals, inspections, and client handovers. Support project handover and provide training to customer personnel. Maintain professional relationships and uphold Honeywell’s image on-site.
- Compliance & Safety: Follow Honeywell and client site safety protocols. Ensure work complies with NFPA/EN standards and local Civil Defense (KFF) regulations. Keep systems updated with the latest firmware and software patches.
- Work with the customers to understand their requirements and act as a consultant and provide suggestions for their issues. Maintain Time sheets for billing purpose .Work with solution architects and proposal team for spot proposal submission.
- Escalate issues in a Timely Manner and follow up the same to solve them in the agreed time frame. Report possible future failures, disturbances, and other opportunities for improvement. Act on priority for requests for spares and additional requests from the customer.
- Follow the Honeywell SOPs, HSE and quality systems while delivering the execution of spot services
- Carry out hazard and risk assessments for all tasks as per company policy and procedures.
- Support in delivery of spot services as per the scope of work for the assignment, working in concert with the services Operations leader (SOL) . Maintains communications with SOL and FSM. Mobility between various sites within country. Maintains communications with SOL and client to ensure tight coordination and agreement
- Takes full ownership for delivery as per the scope of work for the assignment, working in concert with the services Operations leader (SOL)
- Pro-actively Manages the SOW and informs SOL/PM of Risks and Opportunities
- Service & Maintenance: Conduct regular preventive maintenance as per the Annual Maintenance Contracts(AMC). Strong knowledge of fixed gas detection systems (point, open path, flame detectors). Familiarity with design and layout of fire detection zones and gas coverage areas. Ability to interpret and work with wiring diagrams, panel schematics, and cause-effect matrices. Sound understanding of networking (Ethernet, RS485, Modbus, BACnet). Carry out site installation verification, loop testing, and system commissioning for Honeywell Fire Alarm Panels (e.g., XLS Range of panels) and Gas Detection Systems (Fixed point-type gas detectors, aspirating systems, flame detectors). Verify all field devices (smoke/heat detectors, MCPs, sounders, gas sensors) for correct installation and functionality. Integrate Honeywell systems with third-party systems via Modbus/BACnet as per design.
- Review and interpret engineering drawings, technical specifications, and BOQ to ensure compliance. Willingness to travel to project sites and work for site surveys and data collection. Maintain service records, test reports, and prepare detailed documentation post-intervention for future projects and estimation support
- Degree in Electrical, Electronics, Instrumentation, or related field.
- Sound knowledge of NFPA, local fire codes, and standards.
- Hands-on experience in addressable and conventional fire alarm panels, flame and gas detectors, and system integration. Strong troubleshooting and diagnostic skills. Good communication and client-handling skills.
- 8–12 years of experience with Fire Alarm, Gas Suppression System and Gas Detection Systems (preferably Honeywell Systems Experience on XLS-3000, XLS-140, XNX & XCD gas detectors and Safety Manager). Hands-on experience with Honeywell XLS3000, XLS-140-2, Verifire Tools and Safety Manager tools. Sound knowledge of NFPA, local fire codes, and standards. Engineer (Project environment) with commissioning and SAT experience
Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable. Seniority level
- Seniority level Mid-Senior level
- Employment type Full-time
- Job function Information Technology
- Industries Appliances, Electrical, and Electronics Manufacturing
Referrals increase your chances of interviewing at Honeywell by 2x
Sign in to set job alerts for “Field Services Engineer” roles. Urgent Hiring-Hydraulic cylinder technician, Service Engineers Hydraulic system auto mobile, Field Specialist III - Managed Pressure Drilling Services Service Engineer- Electrical/ Mechanical Field Specialist III - Managed Pressure Drilling Services Field Specialist IV - Managed Pressure Drilling Services Project Mechanical Engineer (Mechanical Design) Lead Safety Engineer (Principal Project HSE Advisor) Lead Safety Engineer (Principal Project HSE Advisor)We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
7
Field Service Engineer II
Honeywell
Posted 4 days ago
Job Viewed
Job Description
As a Field Service Engineer II, you will have the opportunity to provide advanced technical facilitation and expertise to our customers in the Industrial Automation (IA) business unit.
You will be accountable for troubleshooting and resolving complex technical issue, ensuring the successful implementation of our solutions, and driving customer satisfaction.
You will report directly to our Field Service Engineer Manager, and you'll work out of our Kuwait location as a site support engineer.
+ To ensure efficient delivery of installation, testing, commissioning, troubleshooting, and maintenance services for Honeywell Fire Alarm and Gas Detection Systems at client sites, in line with Honeywell's standards, local regulations, and project specifications. Troubleshoot system faults, alarms, and perform root cause analysis to restore normal operation. Replace faulty devices and reconfigure panels as needed.
+ Documentation & Reporting: Prepare commissioning reports, cause & corrective action reports, test forms, and as-built drawings. Maintain accurate records of service calls, spare part replacements, and system configurations.
+ Customer & Project Interface: Liaise with clients, consultants, and contractors for approvals, inspections, and client handovers. Support project handover and provide training to customer personnel. Maintain professional relationships and uphold Honeywell's image on-site.
+ Compliance & Safety: Follow Honeywell and client site safety protocols. Ensure work complies with NFPA/EN standards and local Civil Defense (KFF) regulations. Keep systems updated with the latest firmware and software patches.
+ Work with the customers to understand their requirements and act as a consultant and provide suggestions for their issues. Maintain Time sheets for billing purpose .Work with solution architects and proposal team for spot proposal submission.
+ Escalate issues in a Timely Manner and follow up the same to solve them in the agreed time frame. Report possible future failures, disturbances, and other opportunities for improvement. Act on priority for requests for spares and additional requests from the customer.
+ Follow the Honeywell SOPs, HSE and quality systems while delivering the execution of spot services
+ Carry out hazard and risk assessments for all tasks as per company policy and procedures.
+ Support in delivery of spot services as per the scope of work for the assignment, working in concert with the services Operations leader (SOL) . Maintains communications with SOL and FSM. Mobility between various sites within country. Maintains communications with SOL and client to ensure tight coordination and agreement
+ Takes full ownership for delivery as per the scope of work for the assignment, working in concert with the services Operations leader (SOL)
+ Pro-actively Manages the SOW and informs SOL/PM of Risks and Opportunities
+ Service & Maintenance: Conduct regular preventive maintenance as per the Annual Maintenance Contracts (AMC). Strong knowledge of fixed gas detection systems (point, open path, flame detectors). Familiarity with design and layout of fire detection zones and gas coverage areas. Ability to interpret and work with wiring diagrams, panel schematics, and cause-effect matrices. Sound understanding of networking (Ethernet, RS485, Modbus, BACnet). Carry out site installation verification, loop testing, and system commissioning for Honeywell Fire Alarm Panels (e.g., XLS Range of panels) and Gas Detection Systems (Fixed point-type gas detectors, aspirating systems, flame detectors). Verify all field devices (smoke/heat detectors, MCPs, sounders, gas sensors) for correct installation and functionality. Integrate Honeywell systems with third-party systems via Modbus/BACnet as per design.
+ Review and interpret engineering drawings, technical specifications, and BOQ to ensure compliance. Willingness to travel to project sites and work for site surveys and data collection. Maintain service records, test reports, and prepare detailed documentation post-intervention for future projects and estimation support
+ Degree in Electrical, Electronics, Instrumentation, or related field.
+ Sound knowledge of NFPA, local fire codes, and standards.
+ Hands-on experience in addressable and conventional fire alarm panels, flame and gas detectors, and system integration. Strong troubleshooting and diagnostic skills. Good communication and client-handling skills.
+ 8-12 years of experience with Fire Alarm, Gas Suppression System and Gas Detection Systems (preferably Honeywell Systems Experience on XLS-3000, XLS-140, XNX & XCD gas detectors and Safety Manager). Hands-on experience with Honeywell XLS3000, XLS-140-2, Verifire Tools and Safety Manager tools. Sound knowledge of NFPA, local fire codes, and standards. Engineer (Project environment) with commissioning and SAT experience
Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable.
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
You will be accountable for troubleshooting and resolving complex technical issue, ensuring the successful implementation of our solutions, and driving customer satisfaction.
You will report directly to our Field Service Engineer Manager, and you'll work out of our Kuwait location as a site support engineer.
+ To ensure efficient delivery of installation, testing, commissioning, troubleshooting, and maintenance services for Honeywell Fire Alarm and Gas Detection Systems at client sites, in line with Honeywell's standards, local regulations, and project specifications. Troubleshoot system faults, alarms, and perform root cause analysis to restore normal operation. Replace faulty devices and reconfigure panels as needed.
+ Documentation & Reporting: Prepare commissioning reports, cause & corrective action reports, test forms, and as-built drawings. Maintain accurate records of service calls, spare part replacements, and system configurations.
+ Customer & Project Interface: Liaise with clients, consultants, and contractors for approvals, inspections, and client handovers. Support project handover and provide training to customer personnel. Maintain professional relationships and uphold Honeywell's image on-site.
+ Compliance & Safety: Follow Honeywell and client site safety protocols. Ensure work complies with NFPA/EN standards and local Civil Defense (KFF) regulations. Keep systems updated with the latest firmware and software patches.
+ Work with the customers to understand their requirements and act as a consultant and provide suggestions for their issues. Maintain Time sheets for billing purpose .Work with solution architects and proposal team for spot proposal submission.
+ Escalate issues in a Timely Manner and follow up the same to solve them in the agreed time frame. Report possible future failures, disturbances, and other opportunities for improvement. Act on priority for requests for spares and additional requests from the customer.
+ Follow the Honeywell SOPs, HSE and quality systems while delivering the execution of spot services
+ Carry out hazard and risk assessments for all tasks as per company policy and procedures.
+ Support in delivery of spot services as per the scope of work for the assignment, working in concert with the services Operations leader (SOL) . Maintains communications with SOL and FSM. Mobility between various sites within country. Maintains communications with SOL and client to ensure tight coordination and agreement
+ Takes full ownership for delivery as per the scope of work for the assignment, working in concert with the services Operations leader (SOL)
+ Pro-actively Manages the SOW and informs SOL/PM of Risks and Opportunities
+ Service & Maintenance: Conduct regular preventive maintenance as per the Annual Maintenance Contracts (AMC). Strong knowledge of fixed gas detection systems (point, open path, flame detectors). Familiarity with design and layout of fire detection zones and gas coverage areas. Ability to interpret and work with wiring diagrams, panel schematics, and cause-effect matrices. Sound understanding of networking (Ethernet, RS485, Modbus, BACnet). Carry out site installation verification, loop testing, and system commissioning for Honeywell Fire Alarm Panels (e.g., XLS Range of panels) and Gas Detection Systems (Fixed point-type gas detectors, aspirating systems, flame detectors). Verify all field devices (smoke/heat detectors, MCPs, sounders, gas sensors) for correct installation and functionality. Integrate Honeywell systems with third-party systems via Modbus/BACnet as per design.
+ Review and interpret engineering drawings, technical specifications, and BOQ to ensure compliance. Willingness to travel to project sites and work for site surveys and data collection. Maintain service records, test reports, and prepare detailed documentation post-intervention for future projects and estimation support
+ Degree in Electrical, Electronics, Instrumentation, or related field.
+ Sound knowledge of NFPA, local fire codes, and standards.
+ Hands-on experience in addressable and conventional fire alarm panels, flame and gas detectors, and system integration. Strong troubleshooting and diagnostic skills. Good communication and client-handling skills.
+ 8-12 years of experience with Fire Alarm, Gas Suppression System and Gas Detection Systems (preferably Honeywell Systems Experience on XLS-3000, XLS-140, XNX & XCD gas detectors and Safety Manager). Hands-on experience with Honeywell XLS3000, XLS-140-2, Verifire Tools and Safety Manager tools. Sound knowledge of NFPA, local fire codes, and standards. Engineer (Project environment) with commissioning and SAT experience
Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable.
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
This advertiser has chosen not to accept applicants from your region.
8
Field Service Engineer II
Honeywell
Posted 4 days ago
Job Viewed
Job Description
As a Field Service Engineer II, you will have the opportunity to provide advanced technical facilitation and expertise to our customers in the Industrial Automation (IA) business unit.
You will be accountable for troubleshooting and resolving complex technical issue, ensuring the successful implementation of our solutions, and driving customer satisfaction.
You will report directly to our Field Service Engineer Manager, and you'll work out of our Kuwait location as a site support engineer.
+ To ensure efficient delivery of installation, testing, commissioning, troubleshooting, and maintenance services for Honeywell Fire Alarm and Gas Detection Systems at client sites, in line with Honeywell's standards, local regulations, and project specifications. Troubleshoot system faults, alarms, and perform root cause analysis to restore normal operation. Replace faulty devices and reconfigure panels as needed.
+ Documentation & Reporting: Prepare commissioning reports, cause & corrective action reports, test forms, and as-built drawings. Maintain accurate records of service calls, spare part replacements, and system configurations.
+ Customer & Project Interface: Liaise with clients, consultants, and contractors for approvals, inspections, and client handovers. Support project handover and provide training to customer personnel. Maintain professional relationships and uphold Honeywell's image on-site.
+ Compliance & Safety: Follow Honeywell and client site safety protocols. Ensure work complies with NFPA/EN standards and local Civil Defense (KFF) regulations. Keep systems updated with the latest firmware and software patches.
+ Work with the customers to understand their requirements and act as a consultant and provide suggestions for their issues. Maintain Time sheets for billing purpose .Work with solution architects and proposal team for spot proposal submission.
+ Escalate issues in a Timely Manner and follow up the same to solve them in the agreed time frame. Report possible future failures, disturbances, and other opportunities for improvement. Act on priority for requests for spares and additional requests from the customer.
+ Follow the Honeywell SOPs, HSE and quality systems while delivering the execution of spot services
+ Carry out hazard and risk assessments for all tasks as per company policy and procedures.
+ Support in delivery of spot services as per the scope of work for the assignment, working in concert with the services Operations leader (SOL) . Maintains communications with SOL and FSM. Mobility between various sites within country. Maintains communications with SOL and client to ensure tight coordination and agreement
+ Takes full ownership for delivery as per the scope of work for the assignment, working in concert with the services Operations leader (SOL)
+ Pro-actively Manages the SOW and informs SOL/PM of Risks and Opportunities
+ Service & Maintenance: Conduct regular preventive maintenance as per the Annual Maintenance Contracts (AMC). Strong knowledge of fixed gas detection systems (point, open path, flame detectors). Familiarity with design and layout of fire detection zones and gas coverage areas. Ability to interpret and work with wiring diagrams, panel schematics, and cause-effect matrices. Sound understanding of networking (Ethernet, RS485, Modbus, BACnet). Carry out site installation verification, loop testing, and system commissioning for Honeywell Fire Alarm Panels (e.g., XLS Range of panels) and Gas Detection Systems (Fixed point-type gas detectors, aspirating systems, flame detectors). Verify all field devices (smoke/heat detectors, MCPs, sounders, gas sensors) for correct installation and functionality. Integrate Honeywell systems with third-party systems via Modbus/BACnet as per design.
+ Review and interpret engineering drawings, technical specifications, and BOQ to ensure compliance. Willingness to travel to project sites and work for site surveys and data collection. Maintain service records, test reports, and prepare detailed documentation post-intervention for future projects and estimation support
+ Degree in Electrical, Electronics, Instrumentation, or related field.
+ Sound knowledge of NFPA, local fire codes, and standards.
+ Hands-on experience in addressable and conventional fire alarm panels, flame and gas detectors, and system integration. Strong troubleshooting and diagnostic skills. Good communication and client-handling skills.
+ 8-12 years of experience with Fire Alarm, Gas Suppression System and Gas Detection Systems (preferably Honeywell Systems Experience on XLS-3000, XLS-140, XNX & XCD gas detectors and Safety Manager). Hands-on experience with Honeywell XLS3000, XLS-140-2, Verifire Tools and Safety Manager tools. Sound knowledge of NFPA, local fire codes, and standards. Engineer (Project environment) with commissioning and SAT experience
Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable.
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
You will be accountable for troubleshooting and resolving complex technical issue, ensuring the successful implementation of our solutions, and driving customer satisfaction.
You will report directly to our Field Service Engineer Manager, and you'll work out of our Kuwait location as a site support engineer.
+ To ensure efficient delivery of installation, testing, commissioning, troubleshooting, and maintenance services for Honeywell Fire Alarm and Gas Detection Systems at client sites, in line with Honeywell's standards, local regulations, and project specifications. Troubleshoot system faults, alarms, and perform root cause analysis to restore normal operation. Replace faulty devices and reconfigure panels as needed.
+ Documentation & Reporting: Prepare commissioning reports, cause & corrective action reports, test forms, and as-built drawings. Maintain accurate records of service calls, spare part replacements, and system configurations.
+ Customer & Project Interface: Liaise with clients, consultants, and contractors for approvals, inspections, and client handovers. Support project handover and provide training to customer personnel. Maintain professional relationships and uphold Honeywell's image on-site.
+ Compliance & Safety: Follow Honeywell and client site safety protocols. Ensure work complies with NFPA/EN standards and local Civil Defense (KFF) regulations. Keep systems updated with the latest firmware and software patches.
+ Work with the customers to understand their requirements and act as a consultant and provide suggestions for their issues. Maintain Time sheets for billing purpose .Work with solution architects and proposal team for spot proposal submission.
+ Escalate issues in a Timely Manner and follow up the same to solve them in the agreed time frame. Report possible future failures, disturbances, and other opportunities for improvement. Act on priority for requests for spares and additional requests from the customer.
+ Follow the Honeywell SOPs, HSE and quality systems while delivering the execution of spot services
+ Carry out hazard and risk assessments for all tasks as per company policy and procedures.
+ Support in delivery of spot services as per the scope of work for the assignment, working in concert with the services Operations leader (SOL) . Maintains communications with SOL and FSM. Mobility between various sites within country. Maintains communications with SOL and client to ensure tight coordination and agreement
+ Takes full ownership for delivery as per the scope of work for the assignment, working in concert with the services Operations leader (SOL)
+ Pro-actively Manages the SOW and informs SOL/PM of Risks and Opportunities
+ Service & Maintenance: Conduct regular preventive maintenance as per the Annual Maintenance Contracts (AMC). Strong knowledge of fixed gas detection systems (point, open path, flame detectors). Familiarity with design and layout of fire detection zones and gas coverage areas. Ability to interpret and work with wiring diagrams, panel schematics, and cause-effect matrices. Sound understanding of networking (Ethernet, RS485, Modbus, BACnet). Carry out site installation verification, loop testing, and system commissioning for Honeywell Fire Alarm Panels (e.g., XLS Range of panels) and Gas Detection Systems (Fixed point-type gas detectors, aspirating systems, flame detectors). Verify all field devices (smoke/heat detectors, MCPs, sounders, gas sensors) for correct installation and functionality. Integrate Honeywell systems with third-party systems via Modbus/BACnet as per design.
+ Review and interpret engineering drawings, technical specifications, and BOQ to ensure compliance. Willingness to travel to project sites and work for site surveys and data collection. Maintain service records, test reports, and prepare detailed documentation post-intervention for future projects and estimation support
+ Degree in Electrical, Electronics, Instrumentation, or related field.
+ Sound knowledge of NFPA, local fire codes, and standards.
+ Hands-on experience in addressable and conventional fire alarm panels, flame and gas detectors, and system integration. Strong troubleshooting and diagnostic skills. Good communication and client-handling skills.
+ 8-12 years of experience with Fire Alarm, Gas Suppression System and Gas Detection Systems (preferably Honeywell Systems Experience on XLS-3000, XLS-140, XNX & XCD gas detectors and Safety Manager). Hands-on experience with Honeywell XLS3000, XLS-140-2, Verifire Tools and Safety Manager tools. Sound knowledge of NFPA, local fire codes, and standards. Engineer (Project environment) with commissioning and SAT experience
Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable.
Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.
This advertiser has chosen not to accept applicants from your region.
9